{
  "type": "machine",
  "setting_id": "GM003",
  "name": "Kingroon KP3S PRO V2 0.4 nozzle",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_machine_common",
  "printer_model": "Kingroon KP3S PRO V2",
  "default_filament_profile": "Kingroon Generic PLA",
  "default_print_profile": "0.20mm @Kingroon KP3S PRO V2 (0.4 nozzle)",
  "bed_exclude_area": ["0x0"],
  "auxiliary_fan": "0",
  "bbl_calib_mark_logo": "1",
  "change_filament_gcode": "M600",
  "deretraction_speed": ["45"],
  "extruder_clearance_height_to_lid": "140",
  "extruder_clearance_height_to_rod": "36",
  "extruder_clearance_radius": "65",
  "extruder_colour": ["#FCE94F"],
  "extruder_offset": ["0x0"],
  "fan_kickstart": "0",
  "fan_speedup_overhangs": "1",
  "fan_speedup_time": "0",
  "gcode_flavor": "klipper",
  "host_type": "octoprint",
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
  "machine_load_filament_time": "0",
  "machine_max_acceleration_travel": ["9000", "9000"],
  "machine_max_jerk_z": ["0.4", "0.4"],
  "machine_max_speed_e": ["120", "25"],
  "machine_max_speed_x": ["200", "200"],
  "machine_max_speed_y": ["200", "200"],
  "machine_max_speed_z": ["12", "12"],
  "machine_min_extruding_rate": ["0", "0"],
  "machine_min_travel_rate": ["0", "0"],
  "machine_pause_gcode": "PAUSE",
  "machine_unload_filament_time": "0",
  "min_layer_height": ["0.08"],
  "nozzle_diameter": ["0.4"],
  "nozzle_hrc": "0",
  "nozzle_type": "undefine",
  "nozzle_volume": "0",
  "print_host_webui": "",
  "printer_technology": "FFF",
  "printer_variant": "0.4",
  "printhost_apikey": "",
  "printhost_authorization_type": "key",
  "printhost_cafile": "",
  "printhost_password": "",
  "printhost_port": "",
  "printhost_ssl_ignore_revoke": "0",
  "printhost_user": "",
  "retract_before_wipe": ["70%"],
  "retract_length_toolchange": ["2"],
  "retract_restart_extra": ["0"],
  "retract_restart_extra_toolchange": ["0"],
  "retract_when_changing_layer": ["0"],
  "retraction_minimum_travel": ["1"],
  "retraction_speed": ["45"],
  "scan_first_layer": "0",
  "silent_mode": "0",
  "single_extruder_multi_material": "1",
  "template_custom_gcode": "",
  "thumbnails": ["300x300"],
  "upward_compatible_machine": [],
  "use_firmware_retraction": "1",
  "use_relative_e_distances": "1",
  "wipe": ["0"],
  "wipe_distance": ["2"],
  "z_hop_types": ["Auto Lift"],
  "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y200 F6000 ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+20, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nEND_PRINT",
  "machine_max_acceleration_e": ["10000", "5000"],
  "machine_max_acceleration_extruding": ["10000", "9000"],
  "machine_max_acceleration_retracting": ["10000", "9000"],
  "machine_max_acceleration_x": ["10000", "9000"],
  "machine_max_acceleration_y": ["10000", "9000"],
  "machine_max_acceleration_z": ["10000", "100"],
  "machine_max_jerk_e": ["20", "5"],
  "machine_max_jerk_x": ["20", "7"],
  "machine_max_jerk_y": ["20", "7"],
  "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]\nCANCEL_POWEROFF\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nG92 E0",
  "max_layer_height": ["0.32"],
  "print_host": "",
  "printable_area": ["0x0", "205x0", "205x205", "0x205"],
  "printable_height": "200",
  "printer_settings_id": "Kingroon KP3S PRO V2 0.4 nozzle",
  "retraction_length": ["0.8"],
  "version": "1.6.6.0",
  "z_hop": ["0"]
}