{
  "additional_cooling_fan_speed": ["100"],
  "default_filament_colour": ["#FF090F"],
  "enable_overhang_bridge_fan": ["0"],
  "enable_pressure_advance": ["0"],
  "filament_flow_ratio": ["0.95"],
  "filament_max_volumetric_speed": ["37"],
  "filament_retraction_length": ["0.8"],
  "filament_retraction_speed": ["45"],
  "filament_z_hop": ["nil"],
  "from": "System",
  "inherits": "fdm_filament_pla",
  "name": "I3D TESTED PLA",
  "nozzle_temperature": ["215"],
  "nozzle_temperature_initial_layer": ["215"],
  "nozzle_temperature_range_high": ["215"],
  "nozzle_temperature_range_low": ["215"],
  "slow_down_layer_time": ["3"],
  "slow_down_min_speed": ["15"],
  "version": "1.6.6.0",
  "compatible_printers": [
  ]
}