{
    "type": "machine",
    "setting_id": "GM001",
    "name": "Creality Hi 0.6 nozzle",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_creality_common",
    "printer_model": "Creality Hi",
    "gcode_flavor": "klipper",
	"printer_structure": "i3",
    "default_print_profile": "0.30mm Standard @Creality Hi",
    "nozzle_diameter": [
        "0.6"
    ],
    "nozzle_type": "hardened_steel",
    "nozzle_volume": "183",
    "printer_variant": "0.6",
    "printable_area": [
        "0x0",
        "260x0",
        "260x260",
        "0x260"
    ],
    "printable_height": "300",
    "auxiliary_fan": "0",
    "support_air_filtration": "0",
    "support_multi_bed_types": "1",
    "machine_max_acceleration_e": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "12000",
        "12000"
    ],
    "machine_max_acceleration_retracting": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_travel": [
        "12000",
        "12000"
    ],
    "machine_max_acceleration_x": [
        "12000",
        "12000"
    ],
    "machine_max_acceleration_y": [
        "12000",
        "12000"
    ],
    "machine_max_acceleration_z": [
        "1000",
        "1000"
    ],
    "machine_max_speed_e": [
        "50",
        "50"
    ],
    "machine_max_speed_x": [
        "500",
        "500"
    ],
    "machine_max_speed_y": [
        "500",
        "500"
    ],
    "machine_max_speed_z": [
        "30",
        "30"
    ],
    "machine_max_jerk_e": [
        "2.5",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "12",
        "12"
    ],
    "machine_max_jerk_y": [
        "12",
        "12"
    ],
    "machine_max_jerk_z": [
        "2",
        "2"
    ],
    "max_layer_height": [
        "0.35"
    ],
    "min_layer_height": [
        "0.1"
    ],
    "printer_settings_id": "Creality",
    "purge_in_prime_tower": "0",
    "retraction_minimum_travel": [
        "0.5"
    ],
    "retract_before_wipe": [
        "70%"
    ],
    "retraction_length": [
        "0.8"
    ],
    "retract_length_toolchange": [
        "0"
    ],
    "retraction_speed": [
        "40"
    ],
    "deretraction_speed": [
        "40"
    ],
    "retract_lift_below": [
        "299"
    ],
    "retract_when_changing_layer": [
        "1"
    ],
    "enable_filament_ramming": "0",
    "extruder_clearance_height_to_lid": "27",
    "extruder_clearance_height_to_rod": "27",
    "extruder_clearance_radius": "55",
    "z_hop": [
        "0.4"
    ],
    "z_hop_types": [
        "Auto Lift"
    ],
    "wipe_distance": [
        "2"
    ],
    "single_extruder_multi_material": "1",
    "machine_pause_gcode": "PAUSE",
    "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X260 Y180 F30000\nG1 Z{z_after_toolchange} F600",
    "default_filament_profile": [
        "Creality Generic PLA @Hi-all"
    ],
    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
    "machine_end_gcode": "END_PRINT",
    "scan_first_layer": "0",
    "thumbnails": [
        "96x96/PNG, 300x300/PNG"
    ]
}