{
	"type": "machine",
	"setting_id": "GM001",
	"printer_settings_id": "Creality",
	"name": "Creality Ender-3 V3 SE 0.6 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_creality_common",
	"printer_model": "Creality Ender-3 V3 SE",
	"printer_variant": "0.6",
	"gcode_flavor": "marlin2",
	"printer_structure": "i3",
	"default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.6",
	"extruder_clearance_height_to_rod": "47",
    "extruder_clearance_max_radius": "90",
    "extruder_clearance_radius": "90",
    "machine_load_filament_time": "11",
	"nozzle_diameter": [
		"0.6"
	],
	"printable_area": [
		"0x0",
		"220x0",
		"220x220",
		"0x220"
	],
	"printable_height": "250",
	"nozzle_type": "brass",
	"auxiliary_fan": "0",
	"machine_max_acceleration_extruding": [
		"2500",
		"2500"
	],
	"machine_max_acceleration_retracting": [
		"500",
		"500"
	],
	"machine_max_acceleration_travel": [
		"2500",
		"2500"
	],
	"machine_max_acceleration_x": [
		"2500",
		"2500"
	],
	"machine_max_acceleration_y": [
		"2500",
		"2500"
	],
	"machine_max_acceleration_z": [
		"500",
		"500"
	],
	"machine_max_speed_e": [
		"40",
		"40"
	],
	"machine_max_speed_x": [
		"250",
		"250"
	],
	"machine_max_speed_y": [
		"250",
		"250"
	],
	"machine_max_speed_z": [
		"5",
		"5"
	],
	"machine_max_jerk_e": [
		"5",
		"5"
	],
	"machine_max_jerk_x": [
		"10",
		"10"
	],
	"machine_max_jerk_y": [
		"10",
		"10"
	],
	"machine_max_jerk_z": [
		"0.4",
		"0.4"
	],
	"max_layer_height": [
		"0.48"
	],
	"min_layer_height": [
		"0.12"
	],
	"retraction_minimum_travel": [
		"2"
	],
	"retract_before_wipe": [
		"70%"
	],
	"retraction_length": [
		"1.2"
	],
	"retract_length_toolchange": [
		"1"
	],
	"retraction_speed": [
		"40"
	],
	"deretraction_speed": [
		"30"
	],
	"single_extruder_multi_material": "1",
	"manual_filament_change": "1",
	"change_filament_gcode": "M600",
	"machine_pause_gcode": "M25",
	"default_filament_profile": [
		"Creality Generic PLA @Ender-3V3-all"
	],
	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
	"scan_first_layer": "0",
	"disable_m73": "1",
	"thumbnails": [
	]
}