{
    "type": "machine",
    "setting_id": "GM003",
    "name": "Anycubic 4Max Pro 0.4 nozzle",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_machine_common",
    "printer_model": "Anycubic 4Max Pro",
    "default_print_profile": "0.20mm Standard @4MaxPro",
    "nozzle_diameter": [
        "0.4"
    ],
    "bed_exclude_area": [
      "0x0"
    ],
    "printable_area": [
      "0x0",
      "270x0",
      "270x205",
      "0x205"
    ],
    "printable_height": "200",
    "machine_start_gcode": ";M190 S0\n;M104 S0\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n; You can use following code instead if your PRINT_START macro support Chamber and print area bedmesh\n; PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] Chamber=[chamber_temperature] PRINT_MIN={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_MAX={first_layer_print_max[0]},{first_layer_print_max[1]}",
    "machine_end_gcode": "PRINT_END",
    "layer_change_gcode": "",
    "scan_first_layer": "0",
    "nozzle_type": "hardened_steel",
    "auxiliary_fan": "0"
  }