{
    "type": "process",
    "name": "0.25mm Draft @Geeetech M1",
    "inherits": "fdm_process_Geeetech_HS_0.25",
    "from": "system",
    "setting_id": "GP_Geeetech_047",
    "instantiation": "true",
    "line_width": "0.40",
    "outer_wall_line_width": "0.40",
    "initial_layer_line_width": "0.40",
    "sparse_infill_line_width": "0.40",
    "inner_wall_line_width": "0.40",
    "internal_solid_infill_line_width": "0.40",
    "support_line_width": "0.38",
    "top_surface_line_width": "0.40",	
    "initial_layer_speed": "30",	
    "initial_layer_infill_speed": "50",
	"outer_wall_speed": "50",
	"inner_wall_speed": "80",
	"sparse_infill_speed": "100",
	"internal_solid_infill_speed":"100",
	"top_surface_speed": "50",
	"gap_infill_speed": "80",
    "travel_speed": "200",		
    "default_acceleration": "2000",
    "outer_wall_acceleration": "1500",	
    "inner_wall_acceleration": "3000",	    
    "initial_layer_acceleration": "500",
	"top_surface_acceleration": "2000",
    "travel_acceleration": "3000",
    "compatible_printers": [
        "Geeetech M1 0.4 nozzle"
    ]
}