{
	"type": "process",
	"setting_id": "GP004",
    "inherits": "fdm_process_common",
	"name": "0.30mm Draft @Construct 1",
	"from": "system",	
	"instantiation": "true",	
    "bottom_shell_layers": "2",
    "bridge_speed": "60",
    "default_acceleration": "4000",
    "default_jerk": "13",
    "enable_arc_fitting": "1",
    "extra_perimeters_on_overhangs": "1",
    "gap_infill_speed": "200",
    "infill_jerk": "12",
    "initial_layer_acceleration": "2000",
    "initial_layer_infill_speed": "100",
    "initial_layer_jerk": "8",
    "initial_layer_print_height": "0.32",
    "initial_layer_speed": "50",
    "inner_wall_acceleration": "4000",
    "inner_wall_jerk": "10",
    "inner_wall_line_width": "0.44",
    "inner_wall_speed": "300",
    "internal_solid_infill_line_width": "0.44",
    "internal_solid_infill_speed": "300",
    "is_custom_defined": "0",
    "layer_height": "0.3",
    "line_width": "0.44",
    "only_one_wall_top": "1",
    "outer_wall_acceleration": "4000",
    "outer_wall_jerk": "8",
    "outer_wall_line_width": "0.44",
    "outer_wall_speed": "200",
    "overhang_2_4_speed": "60",
    "overhang_3_4_speed": "40",
    "overhang_4_4_speed": "15",
    "precise_outer_wall": "1",
    "skirt_loops": "1",
    "slow_down_layers": "1",
    "sparse_infill_density": "12%",
    "sparse_infill_line_width": "0.4",
    "sparse_infill_pattern": "crosshatch",
    "sparse_infill_speed": "300",
    "support_speed": "300",
    "top_shell_layers": "2",
    "top_surface_acceleration": "3000",
    "top_surface_jerk": "12",
    "top_surface_line_width": "0.44",
    "top_surface_speed": "200",
    "travel_acceleration": "6400",
    "travel_speed": "320",
    "wall_loops": "2",
    "wall_sequence": "inner-outer-inner wall",
	"compatible_printers": ["Construct 1 0.4 nozzle"]
}