{
  "type": "process",
  "from": "system",
  "instantiation": "true",
  "name": "0.25 Benchy @Snapmaker J1 (0.4 nozzle)",
  "setting_id": "4247211099",
  "inherits": "fdm_process_idex",
  "compatible_printers": [
    "Snapmaker J1 (0.4 nozzle)"
  ],
  "elefant_foot_compensation": "0.15",
  "top_shell_thickness": "0.5",
  "initial_layer_infill_speed": "60",
  "outer_wall_speed": "180",
  "inner_wall_speed": "280",
  "sparse_infill_speed": "200",
  "internal_solid_infill_speed": "280",
  "top_surface_speed": "200",
  "gap_infill_speed": "280",
  "enable_overhang_speed": "0",
  "overhang_1_4_speed": "150",
  "overhang_2_4_speed": "20",
  "overhang_3_4_speed": "10",
  "detect_overhang_wall": "0",
  "reduce_crossing_wall": "0",
  "ensure_vertical_shell_thickness": "0",
  "filename_format": "J1Benchy_{print_time}.gcode",
  "sparse_infill_density": "10%",
  "wall_generator": "classic",
  "seam_position": "nearest",
  "wall_loops": "2",
  "only_one_wall_top": "1",
  "only_one_wall_first_layer": "1",
  "resolution": "0.05",
  "minimum_sparse_infill_area": "0",
  "infill_combination": "1",
  "line_width": "0.5",
  "inner_wall_line_width": "0.5",
  "initial_layer_print_height": "0.25",
  "internal_solid_infill_line_width": "0.5",
  "outer_wall_line_width": "0.5",
  "sparse_infill_line_width": "0.5",
  "support_line_width": "0.5",
  "top_surface_line_width": "0.5",
  "bridge_acceleration": "3000",
  "bridge_speed": "180",
  "default_acceleration": "15000",
  "inner_wall_acceleration": "15000",
  "internal_solid_infill_acceleration": "20000",
  "outer_wall_acceleration": "3000",
  "small_perimeter_speed": "200",
  "sparse_infill_acceleration": "15000",
  "top_surface_acceleration": "8000",
  "travel_acceleration": "28000"
}