{
    "type": "machine",
    "name": "fdm_machine_common",
    "from": "system",
    "instantiation": "false",
    "printer_technology": "FFF",
    "deretraction_speed": [
        "40"
    ],
    "extruder_colour": [
        "#FCE94F"
    ],
    "extruder_offset": [
        "0x0"
    ],
    "gcode_flavor": "marlin",
    "silent_mode": "0",
    "machine_max_acceleration_e": [
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "500"
    ],
    "machine_max_acceleration_retracting": [
        "1000"
    ],
    "machine_max_acceleration_x": [
        "500"
    ],
    "machine_max_acceleration_y": [
        "500"
    ],
    "machine_max_acceleration_z": [
        "100"
    ],
    "machine_max_speed_e": [
        "60"
    ],
    "machine_max_speed_x": [
        "500"
    ],
    "machine_max_speed_y": [
        "500"
    ],
    "machine_max_speed_z": [
        "10"
    ],
    "machine_max_jerk_e": [
        "5"
    ],
    "machine_max_jerk_x": [
        "8"
    ],
    "machine_max_jerk_y": [
        "8"
    ],
    "machine_max_jerk_z": [
        "0.4"
    ],
    "machine_min_extruding_rate": [
        "0"
    ],
    "machine_min_travel_rate": [
        "0"
    ],
    "max_layer_height": [
        "0.32"
    ],
    "min_layer_height": [
        "0.08"
    ],
    "printable_height": "250",
    "extruder_clearance_radius": "65",
    "extruder_clearance_height_to_rod": "36",
    "extruder_clearance_height_to_lid": "140",
    "nozzle_diameter": [
        "0.4"
    ],
    "printer_settings_id": "",
    "printer_variant": "0.4",
    "retraction_minimum_travel": [
        "2"
    ],
    "retract_before_wipe": [
        "70%"
    ],
    "retract_when_changing_layer": [
        "1"
    ],
    "retraction_length": [
        "1"
    ],
    "retract_length_toolchange": [
        "1"
    ],
    "z_hop": [
        "0"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0"
    ],
    "retraction_speed": [
        "60"
    ],
    "retract_lift_below": [
        "0"
    ],
    "single_extruder_multi_material": "1",
    "change_filament_gcode": "",
    "wipe": [
        "1"
    ],
    "z_lift_type": "NormalLift",
    "z_hop_types": "Normal Lift",
    "default_print_profile": "",
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
    "machine_start_gcode": "G90\nG1 X0 Y0 F8000\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n\nSTART_PRINT\n\nM400\nG90\nM83\nG1 Z0.500 F1200\nG1 E10\nG1 E-0.200 Z5 F1200\nG1 X78.000 Y0.000 F8000\nG1 Z0.300 F1200\nG1 X128.000 E12 F{outer_wall_volumetric_speed * 1.0 /(0.3*0.5) * 30}\nG1 X178.000 E8 F{outer_wall_volumetric_speed * 1.0 /(0.3*0.5) * 60}\nG1 X188.000 E-0.200 Z1\nM400\n\nG90\nM83\nG1 X78.000 Y1.000 F8000\nG1 Z0.300 F1200\nG1 X128.000 E12 F{outer_wall_volumetric_speed * 1.0 /(0.3*0.5) * 30}\nG1 X178.000 E8 F{outer_wall_volumetric_speed * 1.0 /(0.3*0.5) * 60}\nG1 X188.000 E-0.500 Z1\nM400\n\n",
    "machine_end_gcode": ""
}