{
	"type": "machine",
	"name": "fdm_x1_common",
	"from": "system",
	"instantiation": "false",
	"inherits": "fdm_chuanying_common",
	"gcode_flavor": "klipper",
	"printable_area": [
		"-110x-110",
		"110x-110",
		"110x110",
		"-110x110"
	],
	"printable_height": "220",
	"auxiliary_fan": "1",
	"machine_max_acceleration_e": [ "5000", "5000" ],
	"machine_max_acceleration_extruding": [ "20000", "20000" ],
	"machine_max_acceleration_retracting": [ "5000", "5000" ],
	"machine_max_acceleration_travel": [ "20000", "20000" ],
	"machine_max_acceleration_x": [ "20000", "20000" ],
	"machine_max_acceleration_y": [ "20000", "20000" ],
	"machine_max_acceleration_z": [ "500", "500" ],
	"machine_max_speed_e": [ "30", "30" ],
	"machine_max_speed_x": [ "600", "600" ],
	"machine_max_speed_y": [ "600", "600" ],
	"machine_max_speed_z": [ "20", "20" ],
	"machine_max_jerk_e": [ "2.5", "2.5" ],
	"machine_max_jerk_x": [ "9", "9" ],
	"machine_max_jerk_y": [ "9", "9" ],
	"machine_max_jerk_z": [ "3", "3" ],
	"printer_settings_id": "Chuanying",
	"retraction_minimum_travel": [ "1" ],
	"retract_before_wipe": [ "100%" ],
	"retract_length_toolchange": [ "2" ],
	"deretraction_speed": [ "35" ],
	"z_hop": [ "0.4" ],
	"single_extruder_multi_material": "0",
	"change_filament_gcode": "",
	"machine_pause_gcode": "M25",
	"default_filament_profile": [ "Flashforge Generic PLA" ],
	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z5 F6000\nG1 E-0.2 F800\nG1 X110 Y-110 F6000\nG1 E2 F800\nG1 Y-110 X55 Z0.25 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG1 Y-110 X55 Z0.45 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG92 E0",
	"machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature",
	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
	"scan_first_layer": "0",
	"thumbnails": [
		"140x110"
	],
	"use_relative_e_distances": "1",
	"z_hop_types": "Auto Lift",
	"retraction_speed": [ "35" ],
	"wipe_distance": "2",
	"extruder_clearance_radius": [ "76" ],
	"extruder_clearance_height_to_rod": [ "27" ],
	"extruder_clearance_height_to_lid": [ "150" ],
	"version": "1.8.0.0"
}