{
	"type": "process",
	"name": "fdm_process_common",
	"from": "system",
	"instantiation": "false",
	
	"accel_to_decel_enable": "0",
	"accel_to_decel_factor": "50%",
	"bottom_shell_thickness": "0",
	"bottom_solid_infill_flow_ratio": "1",
	"bottom_surface_pattern": "monotonic",
	"bridge_acceleration": "50%",
	"bridge_angle": "0",
	"bridge_density": "100%",
	"bridge_flow": "1",
	"bridge_no_support": "0",
	"bridge_speed": "25",
	"brim_ears_detection_length": "1",
	"brim_ears_max_angle": "125",
	"brim_object_gap": "0.1",
	"brim_type": "auto_brim",
	"compatible_printers_condition": "",
	"default_acceleration": "10000",
	"default_jerk": "0",
	"detect_narrow_internal_solid_infill": "1",
	"detect_overhang_wall": "1",
	"detect_thin_wall": "0",
	"draft_shield": "disabled",
	"elefant_foot_compensation": "0.15",
	"enable_arc_fitting": "1",
	"enable_overhang_speed": "1",
	"enable_prime_tower": "0",
	"enable_support": "0",
	"enforce_support_layers": "0",
	"ensure_vertical_shell_thickness": "1",
	"extra_perimeters_on_overhangs": "0",
	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
	"filter_out_gap_fill": "0",
	"flush_into_infill": "0",
	"flush_into_objects": "0",
	"flush_into_support": "1",
	"fuzzy_skin": "none",
	"fuzzy_skin_point_distance": "0.8",
	"fuzzy_skin_thickness": "0.3",

	"gcode_add_line_number": "0",
	"gcode_comments": "0",
	"gcode_label_objects": "0",
	"independent_support_layer_height": "1",
	"infill_anchor": "400%",
	"infill_anchor_max": "20",
	"infill_combination": "0",
	"infill_direction": "45",
	"infill_jerk": "9",
	"infill_wall_overlap": "15%",
	"initial_layer_acceleration": "500",
	"initial_layer_infill_speed": "50",
	"initial_layer_jerk": "9",
	"initial_layer_line_width": "0.5",
	"initial_layer_min_bead_width": "85%",
	"initial_layer_print_height": "0.2",
	"initial_layer_speed": "50",
	"initial_layer_travel_speed": "100%",
	"inner_wall_acceleration": "10000",
	"inner_wall_jerk": "9",
	"inner_wall_line_width": "0.45",
	"interface_shells": "0",
	"internal_bridge_speed": "50%",
	"internal_bridge_support_thickness": "0.8",
	"internal_solid_infill_acceleration": "100%",
	"internal_solid_infill_line_width": "0.42",
	"internal_solid_infill_pattern": "monotonic",

	"ironing_flow": "10%",
	"ironing_pattern": "zig-zag",
	"ironing_spacing": "0.15",
	"ironing_speed": "30",
	"ironing_type": "no ironing",
	"line_width": "0.42",
	"make_overhang_printable": "0",
	"make_overhang_printable_angle": "55",
	"make_overhang_printable_hole_size": "0",
	"max_bridge_length": "10",
	"max_travel_detour_distance": "0",
	"min_bead_width": "85%",
	"min_feature_size": "25%",
	"min_width_top_surface": "300%",
	"minimum_sparse_infill_area": "15",
	"notes": "",
	"only_one_wall_first_layer": "0",
	"only_one_wall_top": "1",
	"ooze_prevention": "0",
	"outer_wall_acceleration": "5000",
	"outer_wall_jerk": "9",
	"outer_wall_line_width": "0.42",
	"outer_wall_speed": "200",

	"overhang_4_4_speed": "10",
	"overhang_speed_classic": "0",
	"post_process": [],
	"precise_outer_wall": "0",
	"prime_tower_brim_width": "3",
	"prime_tower_width": "35",
	"prime_volume": "45",
	"print_sequence": "by layer",

	"raft_contact_distance": "0.1",
	"raft_expansion": "1.5",
	"raft_first_layer_density": "90%",
	"raft_first_layer_expansion": "2",
	"raft_layers": "0",
	"reduce_crossing_wall": "0",
	"reduce_infill_retraction": "1",
	"resolution": "0.012",
	"role_based_wipe_speed": "1",
	"seam_gap": "10%",
	"seam_position": "aligned",
	"single_extruder_multi_material_priming": "1",
	"skirt_distance": "2",
	"skirt_height": "1",
	"skirt_loops": "0",
	"skirt_speed": "50",
	"slice_closing_radius": "0.049",
	"slicing_mode": "regular",
	"slow_down_layers": "0",
	"small_perimeter_speed": "50%",
	"small_perimeter_threshold": "0",
	"solid_infill_filament": "1",
	"sparse_infill_acceleration": "100%",
	"sparse_infill_density": "15%",
	"sparse_infill_filament": "1",
	"sparse_infill_line_width": "0.45",
	"sparse_infill_pattern": "grid",

	"spiral_mode": "0",
	"staggered_inner_seams": "0",
	"standby_temperature_delta": "-5",
	"support_angle": "0",
	"support_base_pattern": "default",
	"support_base_pattern_spacing": "2.5",
	"support_bottom_interface_spacing": "0.5",
	"support_bottom_z_distance": "0.2",
	"support_critical_regions_only": "0",
	"support_expansion": "0",
	"support_filament": "0",
	"support_interface_bottom_layers": "2",
	"support_interface_filament": "0",
	"support_interface_loop_pattern": "0",
	"support_interface_pattern": "auto",
	"support_interface_spacing": "0.5",
	"support_interface_speed": "80",
	"support_interface_top_layers": "2",
	"support_line_width": "0.42",
	"support_object_xy_distance": "0.35",
	"support_on_build_plate_only": "0",
	"support_remove_small_overhang": "1",
	"support_speed": "150",
	"support_style": "default",
	"support_threshold_angle": "30",
	"support_top_z_distance": "0.2",
	"support_type": "normal(auto)",
	"thick_bridges": "0",
	"timelapse_type": "0",

	"top_solid_infill_flow_ratio": "1",
	"top_surface_acceleration": "2000",
	"top_surface_jerk": "9",
	"top_surface_line_width": "0.42",
	"top_surface_pattern": "monotonicline",
	"top_surface_speed": "200",
	"travel_acceleration": "10000",
	"travel_jerk": "12",
	"travel_speed": "500",
	"travel_speed_z": "0",
	"tree_support_adaptive_layer_height": "1",
	"tree_support_angle_slow": "25",
	"tree_support_auto_brim": "0",
	"tree_support_branch_angle": "45",
	"tree_support_branch_angle_organic": "40",
	"tree_support_branch_diameter": "2",
	"tree_support_branch_diameter_angle": "5",
	"tree_support_branch_diameter_double_wall": "3",
	"tree_support_branch_diameter_organic": "2",
	"tree_support_branch_distance": "5",
	"tree_support_branch_distance_organic": "1",
	"tree_support_brim_width": "0",
	"tree_support_tip_diameter": "0.8",
	"tree_support_top_rate": "30%",

	"version": "1.6.0.0",
	"wall_distribution_count": "1",
	"wall_filament": "1",
	"wall_generator": "classic",
	"wall_infill_order": "inner wall/outer wall/infill",
	"wall_loops": "2",
	"wall_transition_angle": "10",
	"wall_transition_filter_deviation": "25%",
	"wall_transition_length": "100%",
       "wipe_on_loops": "0",
	"wipe_speed": "80%",
	"wipe_tower_bridging": "10",
	"wipe_tower_cone_angle": "0",
	"wipe_tower_extra_spacing": "100%",
	"wipe_tower_extruder": "0",
	"wipe_tower_no_sparse_layers": "0",
	"wipe_tower_rotation_angle": "0",
	"wiping_volumes_extruders": [
		"70",
		"70",
		"70",
		"70",
		"70",
		"70",
		"70",
		"70",
		"70",
		"70"
	],
	"xy_contour_compensation": "0",
	"xy_hole_compensation": "0",
    "exclude_object": "1"
}