{
    "type": "machine",
    "setting_id": "GM001",
    "name": "Creality K1 (0.4 nozzle)",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_creality_common",
    "printer_model": "Creality K1",
    "gcode_flavor": "klipper",
    "default_print_profile": "0.20mm Standard @Creality K1 (0.4 nozzle)",
    "nozzle_diameter": [
        "0.4"
    ],
    "printer_variant": "0.4",
    "printable_area": [
        "0x0",
        "220x0",
        "220x220",
        "0x220"
    ],
    "printable_height": "250",
    "nozzle_type": "brass",
    "auxiliary_fan": "1",
    "support_multi_bed_types": "1",
    "machine_max_acceleration_e": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_retracting": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_travel": [
        "9000",
        "9000"
    ],
    "machine_max_acceleration_x": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_y": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_z": [
        "500",
        "500"
    ],
    "machine_max_speed_e": [
        "100",
        "100"
    ],
    "machine_max_speed_x": [
        "800",
        "800"
    ],
    "machine_max_speed_y": [
        "800",
        "800"
    ],
    "machine_max_speed_z": [
        "20",
        "20"
    ],
    "machine_max_jerk_e": [
        "2.5",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "12",
        "12"
    ],
    "machine_max_jerk_y": [
        "12",
        "12"
    ],
    "machine_max_jerk_z": [
        "2",
        "2"
    ],
    "max_layer_height": [
        "0.3"
    ],
    "min_layer_height": [
        "0.08"
    ],
    "printer_settings_id": "Creality",
    "retraction_minimum_travel": [
        "2"
    ],
    "retract_before_wipe": [
        "0%"
    ],
    "retraction_length": [
        "0.6"
    ],
    "retract_length_toolchange": [
        "1"
    ],
    "retraction_speed": [
        "40"
    ],
    "deretraction_speed": [
        "40"
    ],
    "extruder_clearance_height_to_lid": "101",
    "extruder_clearance_height_to_rod": "45",
    "extruder_clearance_radius": "45",
    "z_hop": [
        "0.2"
    ],
    "wipe_distance": [
        "2"
    ],
    "single_extruder_multi_material": "1",
    "manual_filament_change": "1",
    "change_filament_gcode": "PAUSE",
    "machine_pause_gcode": "PAUSE",
    "default_filament_profile": [
        "Creality HF Generic PLA"
    ],
    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
    "machine_end_gcode": "END_PRINT",
    "scan_first_layer": "0",
    "thumbnails": [
        "100x100",
        "320x320"
    ]
}