{
  "type": "process",
  "setting_id": "GP040",
  "name": "0.20mm 0.4 Standard @Snapmaker J1",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_process_common",
  "bottom_shell_layers": "4",
  "bridge_acceleration": "60%",
  "brim_type": "no_brim",
  "default_acceleration": "5000",
  "default_jerk": "3",
  "elefant_foot_compensation": "0.1",
  "enable_arc_fitting": "1",
  "enable_support": "1",
  "filename_format": "{input_filename_base}_{layer_height}mm_J1_{print_time}.gcode",
  "flush_into_infill": "1",
  "gap_infill_speed": "80",
  "gcode_comments": "1",
  "infill_jerk": "3",
  "initial_layer_acceleration": "1000",
  "initial_layer_infill_speed": "40",
  "initial_layer_jerk": "1",
  "initial_layer_speed": "35",
  "initial_layer_travel_speed": "50%",
  "inner_wall_acceleration": "2000",
  "inner_wall_jerk": "3",
  "inner_wall_line_width": "0.44",
  "inner_wall_speed": "120",
  "internal_solid_infill_line_width": "0.45",
  "internal_solid_infill_speed": "160",
  "is_custom_defined": "0",
  "layer_height": "0.25",
  "line_width": "0.44",
  "max_travel_detour_distance": "3",
  "only_one_wall_top": "1",
  "outer_wall_acceleration": "2000",
  "outer_wall_jerk": "2",
  "outer_wall_line_width": "0.42",
  "outer_wall_speed": "100",
  "overhang_1_4_speed": "50",
  "overhang_2_4_speed": "30",
  "overhang_3_4_speed": "20",
  "post_process": [
      "/Users/hliebscher/smfix_bs-darwin-arm64",
      "\n/Users/hliebscher/j1x2",
      "\n"
  ],
  "precise_outer_wall": "1",
  "prime_tower_brim_width": "1",
  "prime_tower_width": "10",
  "prime_volume": "2",
  "print_settings_id": "0.4 0.25mm Normal S2J2 Parts",
  "reduce_crossing_wall": "1",
  "skirt_loops": "2",
  "small_perimeter_speed": "80%",
  "small_perimeter_threshold": "6",
  "sparse_infill_density": "35%",
  "sparse_infill_line_width": "0.44",
  "sparse_infill_pattern": "adaptivecubic",
  "sparse_infill_speed": "130",
  "support_interface_top_layers": "0",
  "support_line_width": "0.45",
  "support_speed": "100",
  "support_top_z_distance": "0",
  "support_type": "normal(manual)",
  "thick_bridges": "1",
  "top_shell_thickness": "0",
  "top_surface_acceleration": "1000",
  "top_surface_jerk": "1",
  "top_surface_speed": "60",
  "travel_acceleration": "2500",
  "travel_jerk": "9",
  "travel_speed": "150",
  "tree_support_wall_count": "2",
  "xy_hole_compensation": "0.08",
  "compatible_printers": [
    "Snapmaker J1 0.4 nozzle"
  ]
}