{
  "type": "filament",
  "filament_id": "GFG99",
  "setting_id": "GFSA04",
  "name": "Flashforge PETG",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_filament_pet",
  "filament_flow_ratio": [
    "1"
  ],
  "filament_max_volumetric_speed": [
    "20"
  ],
  "slow_down_layer_time": [
    "8"
  ],
  "temperature_vitrification": [
    "70"
  ],
  "hot_plate_temp_initial_layer": [
    "80"
  ],
  "hot_plate_temp": [
    "80"
  ],
  "close_fan_the_first_x_layers": [
    "1"
  ],
  "slow_down_min_speed": [
    "30"
  ],
  "overhang_fan_speed": [
    "80"
  ],
  "support_material_interface_fan_speed": [
    "90"
  ],
  "additional_cooling_fan_speed": [
    "50"
  ],
  "filament_start_gcode": [
    "; filament start gcode \n;right_extruder_material:PETG"
  ],
  "filament_end_gcode": [
    "; filament end gcode\n"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "enable_pressure_advance": [
    "1"
  ],
  "pressure_advance": [
    "0.0"
  ],
  "filament_density": [
    "1.27"
  ],
  "nozzle_temperature_range_low": [
    "220"
  ],
  "nozzle_temperature_range_high": [
    "260"
  ],
  "nozzle_temperature_initial_layer": [
    "245"
  ],
  "nozzle_temperature": [
    "245"
  ],
  "fan_cooling_layer_time": [
    "30"
  ],
  "fan_max_speed": [
    "90"
  ],
  "fan_min_speed": [
    "40"
  ],
  "overhang_fan_threshold": [
    "25%"
  ],
  "compatible_printers": [
    "Flashforge Adventurer 3 Series 0.4 Nozzle",
    "Flashforge Adventurer 3 Series 0.6 Nozzle"
  ]
}