{
	"type": "machine",
	"setting_id": "GM001",
	"name": "Flashforge Guider 2s 0.4 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_flashforge_common",
	"printer_model": "Flashforge Guider 2s",
	"gcode_flavor": "marlin",
	"default_print_profile": "0.20mm Standard @Flashforge Guider 2s 0.4 nozzle",
	"nozzle_diameter": [ "0.4" ],
	"printer_variant": "0.4",
	"printable_area": [
		"-140x-125",
        "140x-125",
        "140x125",
        "-140x125"
	],
	"printable_height": "300",
	"extruder_offset": [ "-20", "10" ],
	"extruder_clearance_height_to_lid": "70",
    "extruder_clearance_height_to_rod": "23",
    "extruder_clearance_radius": "40",
	"use_relative_e_distances": "0",
	"auxiliary_fan": "1",
	"machine_max_acceleration_e": [ "200", "200" ],
	"machine_max_acceleration_extruding": [ "200", "200" ],
	"machine_max_acceleration_retracting": [ "200", "200" ],
	"machine_max_acceleration_travel": [ "200", "200" ],
	"machine_max_acceleration_x": [ "200", "200" ],
	"machine_max_acceleration_y": [ "200", "200" ],
	"machine_max_acceleration_z": [ "200", "200" ],
	"machine_max_speed_e": [ "100", "100" ],
	"machine_max_speed_x": [ "200", "200" ],
	"machine_max_speed_y": [ "200", "200" ],
	"machine_max_speed_z": [ "20", "20" ],
	"machine_max_jerk_e": [ "2.5", "2.5" ],
	"machine_max_jerk_x": [ "9", "9" ],
	"machine_max_jerk_y": [ "9", "9" ],
	"machine_max_jerk_z": [ "3", "3" ],
	"max_layer_height": [ "0.8" ],
	"min_layer_height": [ "0.02" ],
	"printer_settings_id": "Flashforge",
	"retraction_minimum_travel": [ "1" ],
	"retract_before_wipe": [ "100%" ],
	"retraction_length": [ "1" ],
	"retract_length_toolchange": [ "2" ],
	"retraction_speed": [ "100" ],
	"z_hop": [ "0" ],
	"single_extruder_multi_material": "0",
	"change_filament_gcode": "",
	"machine_pause_gcode": "M25",
	"default_filament_profile": [ "Flashforge Generic PLA" ],
	"machine_start_gcode": "M118 X10 Y10 Z10\nM140 S[bed_temperature_initial_layer_single]; set initial bed temp\nM104 S[nozzle_temperature_initial_layer] T0; set initial extruder temp\nM107; disable cooling fan\nG90; set to absolute positioning\nG28; home axes\nM132 X Y A B; recall home offsets from EPROM\nG1 Z50.0 F420; adjust Z\nG161 X Y F3300\nM7; wait for bed to stabilize\nM6 T0; wait for extruder to stabilize\nM651 S255; start case fan\nG1 Z0.3 F3600; move down to purge\nG92 E0; zero extruders\nG1 X120 Y-125 E20 F2000; extrude a line of filament across the front edge of the bed\nG1 X130 Y-125 F180; wait for ooze\nG1 X140 Y-125 F5000; fast wipe\nG1 Z1 F100; lift\nG92 E0; zero extruders again\nG1 E-1.0000 F1800",
	"machine_end_gcode": "M104 S0 T0; cool down extruder\nM140 S0 T0; cool down bed\nG162 Z F1800\nG28 X Y; home axes\nM132 X Y A B; recall home offsets from EPROM\nM652; turn off rear fan\nG91; set to relative positioning\nM18; disable stepper motors",
	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
	"wipe_distance": "2",
	"nozzle_type": "undefine"
}