{
  "type": "machine",
  "name": "fdm_klipper_common",
  "from": "system",
  "instantiation": "false",
  "inherits": "fdm_machine_common",
  "gcode_flavor": "klipper",


  "auxiliary_fan": "1",
  "bed_exclude_area": [
      "0x0"
  ],
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
  "change_filament_gcode": "",
  "cooling_tube_length": "5",
  "cooling_tube_retraction": "91.5",
  "default_filament_profile": [
      "InfiMech Generic PLA"
  ],
  "default_print_profile": "0.20mm Standard @InfiMech TX",
  "deretraction_speed": [
      "40"
  ],
  "enable_filament_ramming": "1",
  "extra_loading_move": "-2",
  "extruder_clearance_height_to_lid": "69",
  "extruder_clearance_height_to_rod": "69",
  "extruder_clearance_radius": "49",
  "extruder_colour": [
      "#FCE94F"
  ],
  "extruder_offset": [
      "0x0"
  ],
  "fan_kickstart": "0",
  "fan_speedup_overhangs": "1",
  "fan_speedup_time": "0",

  "high_current_on_filament_swap": "0",


  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
  "machine_end_gcode": "PRINT_END",
  "machine_load_filament_time": "0",
  "machine_max_acceleration_e": [
      "5000",
      "5000"
  ],
  "machine_max_acceleration_extruding": [
      "20000",
      "20000"
  ],
  "machine_max_acceleration_retracting": [
      "5000",
      "5000"
  ],
  "machine_max_acceleration_travel": [
      "9000",
      "9000"
  ],
  "machine_max_acceleration_x": [
      "20000",
      "20000"
  ],
  "machine_max_acceleration_y": [
      "20000",
      "20000"
  ],
  "machine_max_acceleration_z": [
      "30",
      "200"
  ],
  "machine_max_jerk_e": [
      "2.5",
      "2.5"
  ],
  "machine_max_jerk_x": [
      "9",
      "9"
  ],
  "machine_max_jerk_y": [
      "9",
      "9"
  ],
  "machine_max_jerk_z": [
      "2",
      "0.4"
  ],
  "machine_max_speed_e": [
      "15",
      "25"
  ],
  "machine_max_speed_x": [
      "600",
      "200"
  ],
  "machine_max_speed_y": [
      "600",
      "200"
  ],
  "machine_max_speed_z": [
      "5",
      "12"
  ],
  "machine_min_extruding_rate": [
      "0",
      "0"
  ],
  "machine_min_travel_rate": [
      "0",
      "0"
  ],
  "machine_pause_gcode": "PAUSE",
  "machine_start_gcode": "M140 S[bed_temperature_initial_layer_single]\nG28 X Y\nM104 S240\nSET_KINEMATIC_POSITION Z=255 \nPROBE SAMPLES=1 SAMPLE_RETRACT_DIST=3 \nSET_KINEMATIC_POSITION Z=0 \nG90\nG1 Z2\nG1 X10 Y-2.5 F3000\nG90\nG1 Z3  \nG1 X110 Y-2.5 F4000\nG1 Z10\nM109 S240\nG92 E0\nG1 E15 F300\nG1 E-4.0 F3600\nM104 S130\nM106 S255 \nG4 P4000\nG1 X150 Y-0.5 F4000\nG92 E0\n;G1 E-4.0 F3600\nPROBE SAMPLES=2 SAMPLE_RETRACT_DIST=2 \nSET_KINEMATIC_POSITION Z=0\nG1 Z0\nG1 X140 Y-0.5 F400 \nPROBE SAMPLES=2 SAMPLE_RETRACT_DIST=2 \nSET_KINEMATIC_POSITION Z=0\nG1 Z0\nG1 X130 Y-0.5 F400 \nPROBE SAMPLES=2 SAMPLE_RETRACT_DIST=2 \nSET_KINEMATIC_POSITION Z=0\nG1 Z0 \nG1 X110 Y-0.5 F200\nM104 S130\nM106 S255\nPROBE SAMPLES=2 SAMPLE_RETRACT_DIST=2 \nSET_KINEMATIC_POSITION Z=0\nG1 Z0\nG1 X100 Y-0.5 F100 \nPROBE SAMPLES=2 SAMPLE_RETRACT_DIST=2 \nSET_KINEMATIC_POSITION Z=0\nG1 Z0\nG1 X90 Y-0.5 F100\nPROBE SAMPLES=2 SAMPLE_RETRACT_DIST=2 \nSET_KINEMATIC_POSITION Z=0\nG1 Z0\nG1 X60 Y-0.5 F100\nM106 S0\nG90\nG1 Z2\nM140 S60\nM109 S130\nG1 X110 Y110 F3000\nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0\nZ_TILT_ADJUST\nG90\nG1 Z2\nG4 P200\nG1 X110 Y110 F3000\nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0\nG1 X-3 Y2 Z3 F5000.0\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START",
  "machine_unload_filament_time": "0",
  "max_layer_height": [
      "0.32"
  ],
  "min_layer_height": [
      "0.08"
  ],

  "nozzle_diameter": [
      "0.4"
  ],
  "nozzle_hrc": "0",
  "nozzle_type": "brass",
  "nozzle_volume": "151.32",
  "parking_pos_retraction": "92",

  "print_host_webui": "",
  "printable_area": [
      "0x0",
      "220x0",
      "220x220",
      "0x220"
  ],
  "printable_height": "250",
  "printer_model": "Generic Klipper Printer",
  "printer_notes": "",
  "printer_settings_id": "InfiMech TX 0.4 nozzle",
  "printer_technology": "FFF",
  "printer_variant": "0.4",
  "printhost_apikey": "",
  "printhost_authorization_type": "key",
  "printhost_cafile": "",
  "printhost_password": "",
  "printhost_port": "",
  "printhost_ssl_ignore_revoke": "0",
  "printhost_user": "",
  "purge_in_prime_tower": "1",
  "retract_before_wipe": [
      "70%"
  ],
  "retract_length_toolchange": [
      "0"
  ],
  "retract_lift_above": [
      "0"
  ],
  "retract_lift_below": [
      "0"
  ],
  "retract_lift_enforce": [
      "All Surfaces"
  ],
  "retract_restart_extra": [
      "0"
  ],
  "retract_restart_extra_toolchange": [
      "0"
  ],
  "retract_when_changing_layer": [
      "0"
  ],
  "retraction_length": [
      "0.5"
  ],
  "retraction_minimum_travel": [
      "1"
  ],
  "retraction_speed": [
      "40"
  ],
  "scan_first_layer": "0",
  "silent_mode": "0",
  "single_extruder_multi_material": "1",
  "template_custom_gcode": "",
  "thumbnails": [
      "300x300"
  ],
  "upward_compatible_machine": [],
  "use_firmware_retraction": "0",
  "use_relative_e_distances": "1",
  "version": "1.6.0.0",
  "wipe": [
      "0"
  ],
  "wipe_distance": [
      "1"
  ],
  "z_hop": [
      "0"
  ],
  "z_hop_types": [
      "Normal Lift"
  ]

  
}