{
	"type": "machine",
	"setting_id": "GM001",
	"printer_settings_id": "CONSTRUCT3D",
	"name": "Construct 1 0.4 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_machine_common",
	"printer_model": "Construct 1",
	"default_print_profile": "0.22mm Quality @Construct 1",
	"nozzle_diameter": [
		"0.4"
	],
	"printer_variant": "0.4",
    "printable_area": [
        "0x0",
        "225x0",
        "225x260",
        "0x260"
    ],
	"printable_height": "180",
	"nozzle_type": "hardened_steel",
	"thumbnails_format": "QOI",
	    "machine_max_acceleration_e": [
        "9000"
    ],
    "machine_max_acceleration_extruding": [
        "9000"
    ],
    "machine_max_acceleration_retracting": [
        "9000"
    ],
    "machine_max_acceleration_travel": [
        "9000",
        "1250"
    ],
    "machine_max_acceleration_x": [
        "18000"
    ],
    "machine_max_acceleration_y": [
        "18000"
    ],
    "machine_max_jerk_e": [
        "6"
    ],
    "machine_max_jerk_x": [
        "25"
    ],
    "machine_max_jerk_y": [
        "25"
    ],
    "machine_max_speed_e": [
        "100"
    ],
    "machine_max_speed_x": [
        "320"
    ],
    "machine_max_speed_y": [
        "320"
    ],
    "machine_max_speed_z": [
        "40"
    ],
    "machine_end_gcode": ";Retract the filament\nG92 E1\nG1 E-5 F900\n;Move nozzle fast\nG1 X5 Y258 F15000\n;Move Bed Down\nG1 Z180 F6000\n\n;Set machine to idle\nM104 S0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors",
    "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM106 S0 ; Turn Fan off\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM190 S[first_layer_bed_temperature] ; set bed temp\nM109 S160 ; set extruder temp\nM557 P5 X{adaptive_bed_mesh_min[0]}:{adaptive_bed_mesh_max[0]} Y{adaptive_bed_mesh_min[1]}:{adaptive_bed_mesh_max[1]} ; dynamic meshing\nG28 ; home all\nG1 Z15 F6000 ; move the printer down 15mm\nG1 Y1.0 Z0.3 F4000 ; move print head up\nM109 S[first_layer_temperature] ; set extruder temp\n\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n;prime the extruder\nG1 X5 Y2 Z0.3 F6000; go to edge of build volume\nG1 X60 E10 F1000 ;gentle purge start\nG1 X110 E25 F1000; heavy purge\nG1 X60;",
    "max_layer_height": [
        "0.38"
    ],
	"min_layer_height": [
        "0.08"
    ],
	    "retraction_length": [
        "0.7"
    ],
    "retraction_speed": [
        "50"
    ],
	    "z_hop": [
        "0.2"
    ],
    "bed_mesh_max": "200,235",
    "bed_mesh_min": "10,20",
    "fan_kickstart": "0.5",
    "fan_speedup_time": "1",
    "z_hop_types": [
        "Auto Lift"
    ]
}