{
	"type": "machine",
	"setting_id": "GM001",
	"name": "Raise3D Pro3 Plus 0.4 nozzle (Dual)",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_machine_common",
	"printer_model": "Raise3D Pro3 Plus",
	"default_print_profile": "0.20mm Standard @Raise3D Pro3Plus",
	"nozzle_diameter": [
		"0.4",
		"0.4"
	],
    "extruder_colour": [
        "#FCE94F",
		"#FCE94F"
    ],
    "extruder_offset": [
        "0x0",
		"0x0"
    ],
	"printable_area": [
		"0x0",
		"340x0",
		"340x300",
		"0x300"
	],
	"printable_height": "605",
	"nozzle_type": "hardened_steel",
	"auxiliary_fan": "0",
    "machine_max_acceleration_e": [
        "3000",
		"3000"
    ],
	"machine_max_acceleration_extruding": [
		"1000",
		"300"
	],
	"machine_max_acceleration_retracting": [
		"3000",
		"1500"
	],
	"machine_max_acceleration_travel": [
		"1500",
		"500"
	],
	"machine_max_acceleration_x": [
		"1000",
		"1000"
	],
	"machine_max_acceleration_y": [
		"1000",
		"1000"
	],
	"machine_max_acceleration_z": [
		"100",
		"100"
	],
	"machine_max_speed_e": [
		"120",
		"120"
	],
	"machine_max_speed_x": [
		"500",
		"200"
	],
	"machine_max_speed_y": [
		"500",
		"200"
	],
	"machine_max_speed_z": [
		"12",
		"12"
	],
	"machine_max_jerk_e": [
		"5",
		"5"
	],
	"machine_max_jerk_x": [
		"5",
		"5"
	],
	"machine_max_jerk_y": [
		"5",
		"5"
	],
	"machine_max_jerk_z": [
		"0.4",
		"0.4"
	],
	"max_layer_height": [
		"0.4",
		"0.4"
	],
	"min_layer_height": [
		"0.1",
		"0.1"
	],
	"printer_settings_id": "Raise3D",
	"retraction_minimum_travel": [
		"0.6",
		"0.6"
	],
	"retract_before_wipe": [
		"0%",
		"0%"
	],
	"retraction_length": [
		"0.5",
		"0.5"
	],
	"retract_length_toolchange": [
		"2",
		"2"
	],
    "retract_when_changing_layer": [
        "1",
		"1"
    ],
    "retract_restart_extra": [
        "0",
		"0"
    ],
    "retract_restart_extra_toolchange": [
        "0",
		"0"
    ],
	"retraction_speed": [
		"40",
		"40"
	],
	"deretraction_speed": [
		"0",
		"0"
	],
    "wipe": [
        "1",
		"1"
    ],
	"single_extruder_multi_material": "0",
	"change_filament_gcode": "",
	"machine_pause_gcode": "; pause print\nM2000",
	"default_filament_profile": [
		"Raise3D Generic PLA"
	],
	"machine_start_gcode": ";Bounding Box: {digits(first_layer_print_min[0],0,2)} {if(first_layer_print_max[0]>300)}{300}{else}{digits(first_layer_print_max[0],0,2)}{endif} {digits(first_layer_print_min[1],0,2)} {if(first_layer_print_max[1]>300)}{300}{else}{digits(first_layer_print_max[1],0,2)}{endif}\n\nM104 T0 S{nozzle_temperature_initial_layer[0] - 30} ; raise extruder one temp\nM104 T1 S{nozzle_temperature_initial_layer[1] - 30} ; raise extruder two temp\nM190 S{max(bed_temperature_initial_layer_single, bed_temperature_initial_layer_single)} ; wait for bed temp\nM109 T1 S{nozzle_temperature_initial_layer[1]} ; wait for extruder two temp\nT1\nG21\nG90\nM82\nM107\nM106 P2 S0\nG1 Z0.3 F500\nG92 E0\nG1 Z0.3 F400\nG1 X60 Y{random(2,8)} F1000\nG1 X110 Y{random(2,8)} E30 F200\nG1 Z0.3 E15 F200\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X170 F2000 ; move away from purge line\nM104 T1 S{nozzle_temperature_initial_layer[1] - 30} ; lower extruder two temp\nM109 T0 S{nozzle_temperature_initial_layer[0]} ; wait for extruder one temp\nT0\nG1 Z0.3 F400\nG1 X220 Y{random(2,8)} F1000\nG1 X270 Y{random(2,8)} E18 F200\nG1 Z5 E15 F200\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 Y30 F2000 ; move away from purge line\nM104 T0 S{nozzle_temperature_initial_layer[1] - 30} ; lower extruder one temp\nG92 E0\nG1 X{(first_layer_print_max[0] + first_layer_print_min[0])/2} Y{(first_layer_print_max[1] + first_layer_print_min[1])/2} Z{initial_layer_print_height} ; move to center of print\nM117 Printing...",
	"machine_end_gcode": "M221 T0 S100\nM104 S0\nM140 S0\nM107\nM106 P2 S0\nG91\nG1 E-1 F300\nG1 Z+0.5 E-5 X-20 Y-20 F9000.00\nG28 X0 Y0\nM84\nG90",
	"toolchange_gcode": "; layer [layer_num] tool change\n{if layer_z < initial_layer_print_height + layer_height * 2}\nM104 T[current_extruder] S{nozzle_temperature_initial_layer[current_extruder] - 30}\nM109 T[next_extruder] S{nozzle_temperature_initial_layer[next_extruder]}\n{else}\nM104 T[current_extruder] S{nozzle_temperature[current_extruder] - 30}\nM109 T[next_extruder] S{nozzle_temperature[next_extruder]}\n{endif}",
	"before_layer_change_gcode": "; before layer [layer_num] change\n{if layer_z <= initial_layer_print_height + layer_height * 2}\nM140 S{max(bed_temperature_initial_layer_single, bed_temperature_initial_layer_single)}\n{else}\nM140 S{max(bed_temperature[0], bed_temperature[1])}\n{endif}\n{if (filament_type[0] ==\"PLA\" or filament_type[0] ==\"PETG\")}\n{if layer_z >= initial_layer_print_height + layer_height * 2}\nM106 P2 S150\n{elsif layer_z >= initial_layer_print_height + layer_height * 1}\nM106 P2 S100\n{else}\nM106 P2 S0\n{endif}\n{endif}",
	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
	"scan_first_layer": "0"
}