{
	"type": "machine",
	"setting_id": "GM001",
	"name": "Qidi Q1 Pro 0.4 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_qidi_x3_common",
	"printer_model": "Qidi Q1 Pro",
	"gcode_flavor": "klipper",
	"default_print_profile": "0.20mm Standard @Qidi Q1 Pro",
	"nozzle_diameter": [
		"0.4"
	],
	"printable_area": [
		"0x0",
		"245x0",
		"245x245",
		"0x245"
	],
    "bed_exclude_area": [
                "25x240",
        "115x240",
        "115x245",
        "25x245",
        "208x240",
        "245x240",
        "245x245",
        "208x245"
    ],
	"printable_height": "245",
	"nozzle_type": "hardened_steel",
	"max_layer_height": [
		"0.3"
	],
	"min_layer_height": [
		"0.07"
	],
	"printer_settings_id": "Qidi",
	"retraction_minimum_travel": [
		"1"
	],
	"retraction_length": [
		"0.8"
	],
	"retract_length_toolchange": [
		"10"
	],
	"deretraction_speed": [
		"0"
	],
	"retract_before_wipe": [
        "0%"
    ],
    "wipe_distance": [
        "2"],
	"single_extruder_multi_material": "0",
	"change_filament_gcode": "",
	"machine_pause_gcode": "M0",
    "thumbnails": [
        "160x160",
        "112x112"
    ],
	"layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nLOG_Z\nG92 E0\n",
	"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG91\nG0 Z5 F600\nG90\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
    "machine_start_gcode": "PRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature] CHAMBER=[chamber_temperature]\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[first_layer_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 6}\nG1 Z1 F600",
    "thumbnails_format": "PNG",
	"default_filament_profile": [
		"QIDI PLA Rapido"
	]
}