{
  "type": "process",
  "from": "system",
  "instantiation": "true",
  "name": "0.42 Draft @Snapmaker (0.6 nozzle)",
  "setting_id": "886975587",
  "inherits": "fdm_process_common",
  "compatible_printers": [
    "Snapmaker A250 (0.6 nozzle)",
    "Snapmaker A350 (0.6 nozzle)",
    "Snapmaker A250 Dual (0.6 nozzle)",
    "Snapmaker A350 Dual (0.6 nozzle)",
    "Snapmaker A250 QSKit (0.6 nozzle)",
    "Snapmaker A350 QSKit (0.6 nozzle)",
    "Snapmaker A250 Dual QSKit (0.6 nozzle)",
    "Snapmaker A350 Dual QSKit (0.6 nozzle)"
  ],
  "layer_height": "0.42",
  "wall_loops": "2",
  "top_shell_layers": "3",
  "bridge_speed": "30",
  "line_width": "0.62",
  "outer_wall_line_width": "0.62",
  "initial_layer_line_width": "0.62",
  "sparse_infill_line_width": "0.62",
  "inner_wall_line_width": "0.62",
  "internal_solid_infill_line_width": "0.62",
  "support_line_width": "0.62",
  "top_surface_line_width": "0.62",
  "initial_layer_speed": "35",
  "initial_layer_infill_speed": "55",
  "outer_wall_speed": "75",
  "inner_wall_speed": "85",
  "sparse_infill_speed": "100",
  "internal_solid_infill_speed": "85",
  "gap_infill_speed": "50",
  "overhang_1_4_speed": "0",
  "overhang_2_4_speed": "50",
  "ironing_speed": "30",
  "support_interface_speed": "35",
  "support_speed": "100"
}