{
  "type": "machine",
  "name": "fdm_qidi_x3_common",
  "from": "system",
  "instantiation": "false",
  "inherits": "fdm_machine_common",
	"gcode_flavor": "klipper",
  "auxiliary_fan": "1",
  "change_filament_gcode": "",
	"machine_pause_gcode": "M0",
  "support_chamber_temp_control": "1",
  "retraction_length": [
    "1"
  ],
  "retraction_speed": [
      "30"
  ],
  "z_hop": [
      "0.4"
  ],
  "thumbnails": [
    "380x380/COLPIC",
    "210x210/COLPIC",
    "380x380/PNG"
  ],
  "thumbnails_format": "ColPic",
  "machine_start_gcode": "PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\n",
	"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
	"scan_first_layer": "0"
}