{
"type": "machine",
"setting_id": "GM001",
"from": "system",
"instantiation": "true",
"auxiliary_fan": "1",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0"
],
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "; change filament start\n{if total_toolchanges == 0 and current_extruder == 1}\nM104 S0 T0\n{elsif total_toolchanges > 0 and current_extruder == 0}\nM104 S{nozzle_temperature[0]}\n{if layer_z == initial_layer_print_height}\nT1\nM109 S{nozzle_temperature_initial_layer[1]} T1\n{else}\nT1\nM109 S{nozzle_temperature[1]} T1\n{endif}\n{elsif total_toolchanges > 0 and current_extruder == 1}\nM104 S{nozzle_temperature[1]}\n{if layer_z == initial_layer_print_height}\nT0\nM109 S{nozzle_temperature_initial_layer[0]} T0\n{else}\nT0\nM109 S{nozzle_temperature[0]} T0\n{endif}\n{endif}\n",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"default_filament_profile": [ "Flashforge Generic PLA @G3U" ],
"default_print_profile": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
"deretraction_speed": [
"35"
],
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "150",
"extruder_clearance_height_to_rod": "50",
"extruder_clearance_radius": "57",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "marlin",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"inherits": "fdm_guider3_common",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 T0\nM104 S0 T1",
"machine_load_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"3",
"3"
],
"machine_max_speed_e": [
"30",
"30"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M25",
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\n{if total_toolchanges < 1}\nM109 S[nozzle_temperature_initial_layer] T[initial_extruder]\nT[initial_extruder]\nG21\nG90\nM83\nG1 Z0.3 F400\nG1 X-145 Y{random(-160,-152)} F4800\nG1 X-95 Y{random(-160,-152)} E30 F400\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X-80 F4800 ; move away from purge line\n{else}\nM109 S{nozzle_temperature_initial_layer[0] - 30} T0\nM109 S{nozzle_temperature_initial_layer[1] - 30} T1\n{if initial_extruder==0}\nM109 S{nozzle_temperature_initial_layer[1]} T1\nT1\nG21\nG90\nM83\nG1 Z0.3 F400\nG1 X-145 Y{random(-160,-152)} F4800\nG1 X-95 Y{random(-160,-152)} E30 F400\nG1 E-15 F1800\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X-80 F4800 ; move away from purge line\nM104 S{nozzle_temperature_initial_layer[1]-30} T1\nM109 S{nozzle_temperature_initial_layer[0]} T0\nT0\nG1 Z0.3 F400\nG1 X145 Y{random(-160,-152)} F4800\nG1 X95 Y{random(-160,-152)} E30 F400\nG1 E-0.8 F1800\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X80 F4800 ; move away from purge line\nG92 E0\n{elsif current_extruder == 1}\nM109 S{nozzle_temperature_initial_layer[0]} T0\nT0\nG21\nG90\nM83\nG1 Z0.3 F400\nG1 X-145 Y{random(-160,-152)} F4800\nG1 X-95 Y{random(-160,-152)} E30 F400\nG1 E-15 F1800\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X-80 F4800 ; move away from purge line\nM104 S{nozzle_temperature_initial_layer[0]-30} T0\nM109 S{nozzle_temperature_initial_layer[1]} T1\nT1\nG1 Z0.3 F400\nG1 X145 Y{random(-160,-152)} F4800\nG1 X95 Y{random(-160,-152)} E30 F400\nG1 E-0.8 F1800\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X80 F4800 ; move away from purge line\nG92 E0\n{endif}\n{endif}\n\n",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"name": "Flashforge Guider 3 Ultra 0.4 Nozzle",
"nozzle_diameter": [
"0.4"
],
"nozzle_hrc": "0",
"nozzle_type": "stainless_steel",
"nozzle_volume": "0",
"parking_pos_retraction": "0",
"print_host": "",
"print_host_webui": "",
"printable_area": [
"-150x-165",
"150x-165",
"150x165",
"-150x165"
],
"printable_height": "600",
"printer_model": "Flashforge Guider 3 Ultra",
"printer_notes": "",
"printer_settings_id": "Flashforge",
"printer_structure": "undefine",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_apikey": "",
"printhost_authorization_type": "key",
"printhost_cafile": "",
"printhost_password": "",
"printhost_port": "",
"printhost_ssl_ignore_revoke": "0",
"printhost_user": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"100%"
],
"retract_length_toolchange": [
"15"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"-0.8"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.8"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"35"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"template_custom_gcode": "",
"thumbnails": [
"140x110"
],
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"z_offset": "0"
}