{
    "type": "machine",
    "setting_id": "GM003",
    "name": "FLSun Q5 0.4 nozzle",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_machine_common",
    "printer_model": "FLSun Q5",
    "default_print_profile": "0.20mm Standard @FLSun Q5",
	"gcode_flavor": "marlin",
	"thumbnails": [
        "260x260"
    ],
	"nozzle_diameter": [
		"0.4"
	],
	"printable_area": [
		"99.6195x8.71557",
		"98.4808x17.3648",
		"96.5926x25.8819",
		"93.9693x34.202",
		"90.6308x42.2618",
		"86.6025x50",
		"81.9152x57.3576",
		"76.6044x64.2788",
		"70.7107x70.7107",
		"64.2788x76.6044",
		"57.3576x81.9152",
		"50x86.6025",
		"42.2618x90.6308",
		"34.202x93.9693",
		"25.8819x96.5926",
		"17.3648x98.4808",
		"8.71557x99.6195",
		"6.12323e-15x100",
		"-8.71557x99.6195",
		"-17.3648x98.4808",
		"-25.8819x96.5926",
		"-34.202x93.9693",
		"-42.2618x90.6308",
		"-50x86.6025",
		"-57.3576x81.9152",
		"-64.2788x76.6044",
		"-70.7107x70.7107",
		"-76.6044x64.2788",
		"-81.9152x57.3576",
		"-86.6025x50",
		"-90.6308x42.2618",
		"-93.9693x34.202",
		"-96.5926x25.8819",
		"-98.4808x17.3648",
		"-99.6195x8.71557",
		"-100x1.22465e-14",
		"-99.6195x-8.71557",
		"-98.4808x-17.3648",
		"-96.5926x-25.8819",
		"-93.9693x-34.202",
		"-90.6308x-42.2618",
		"-86.6025x-50",
		"-81.9152x-57.3576",
		"-76.6044x-64.2788",
		"-70.7107x-70.7107",
		"-64.2788x-76.6044",
		"-57.3576x-81.9152",
		"-50x-86.6025",
		"-42.2618x-90.6308",
		"-34.202x-93.9693",
		"-25.8819x-96.5926",
		"-17.3648x-98.4808",
		"-8.71557x-99.6195",
		"-1.83697e-14x-100",
		"8.71557x-99.6195",
		"17.3648x-98.4808",
		"25.8819x-96.5926",
		"34.202x-93.9693",
		"42.2618x-90.6308",
		"50x-86.6025",
		"57.3576x-81.9152",
		"64.2788x-76.6044",
		"70.7107x-70.7107",
		"76.6044x-64.2788",
		"81.9152x-57.3576",
		"86.6025x-50",
		"90.6308x-42.2618",
		"93.9693x-34.202",
		"96.5926x-25.8819",
		"98.4808x-17.3648",
		"99.6195x-8.71557",
		"100x-2.44929e-14"
	],
	"printable_height": "200",
	"nozzle_type": "hardened_steel",
	"auxiliary_fan": "0",
    "machine_max_acceleration_e": [
        "3000",
        "800"
    ],
	"machine_max_acceleration_extruding": [
		"1500",
		"800"
	],
	"machine_max_acceleration_retracting": [
		"2000",
		"800"
	],
	"machine_max_acceleration_travel": [
		"1500",
		"800"
	],
	"machine_max_acceleration_x": [
		"1500",
		"800"
	],
	"machine_max_acceleration_y": [
		"1500",
		"800"
	],
	"machine_max_acceleration_z": [
		"1500",
		"800"
	],
	"machine_max_speed_e": [
		"60",
		"30"
	],
	"machine_max_speed_x": [
		"200",
		"150"
	],
	"machine_max_speed_y": [
		"200",
		"150"
	],
	"machine_max_speed_z": [
		"200",
		"150"
	],
	"machine_max_jerk_e": [
		"5",
		"5"
	],
	"machine_max_jerk_x": [
		"5",
		"10"
	],
	"machine_max_jerk_y": [
		"5",
		"10"
	],
	"machine_max_jerk_z": [
		"5",
		"10"
	],
	"max_layer_height": [
		"0.32"
	],
	"min_layer_height": [
		"0.08"
	],
	"printer_settings_id": "FLSun",
	"retraction_minimum_travel": [
		"2"
	],
	"retract_before_wipe": [
		"70%"
	],
	"retraction_length": [
		"3"
	],
	"retract_length_toolchange": [
		"1"
	],
	"retraction_speed": [
		"30"
	],
	"deretraction_speed": [
		"40"
	],
	"single_extruder_multi_material": "1",
	"change_filament_gcode": "",
	"machine_pause_gcode": "M400 U1\n",
	"default_filament_profile": [
		"FLSun Generic PLA"
	],
	"machine_start_gcode": ";STARTGCODE\nM117 Initializing\n; G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM107\nG28 ;Home\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\n\nG92 E0\nG1 X-98 Y0 Z0.2 F4000 ; move to arc start\nG3 X0 Y-98 I98 Z0.2 E40 F400 ; lay arc stripe 90deg\nG0 Z1 \nG92 E0.0\n",
	"machine_end_gcode": "M107\nM104 S0\nM140 S0\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\n;M84\nM18 S180 ;disable motors after 180s\n",
	"scan_first_layer": "0"
  }