{
	"type": "machine",
	"setting_id": "GM001",
	"name": "MM slb 0.4 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_machine_common",
	"printer_model": "MM slb",
	"default_print_profile": "0.10mm Fine @MM slb",
	"nozzle_diameter": [
		"0.4"
	],
	"auxiliary_fan": "0",
	"machine_max_acceleration_travel": [
		"3000",
		"3000"
	],
	"machine_max_acceleration_z": [
		"500",
		"500"
	],
	"machine_max_speed_z": [
		"12",
		"12"
	],
	"max_layer_height": [
		"0.3"
	],
	"printer_settings_id": "MM",
	"retract_before_wipe": [
		"70%"
	],
	"single_extruder_multi_material": "1",
	"change_filament_gcode": "",
	"scan_first_layer": "0",
	"cooling_tube_length": "20",
    "cooling_tube_retraction": "60",
    "deretraction_speed": [
        "25"
    ],
    "extruder_clearance_height_to_lid": "100",
    "extruder_clearance_height_to_rod": "32",
    "extruder_clearance_radius": "50",
    "machine_max_jerk_e": [
        "5",
        "2.5"
    ],
    "machine_max_speed_e": [
        "60",
        "120"
    ],
    "machine_pause_gcode": "M601",
    "nozzle_type": "brass",
    "parking_pos_retraction": "22",
    "retract_length_toolchange": [
        "5"
    ],
    "retraction_minimum_travel": [
        "1"
    ],
    "retraction_speed": [
        "25"
    ],
	"default_filament_profile": [
		"MM Generic PLA"
	],
    "is_custom_defined": "0",
    "machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG28 X0\nG0 Y120\nG1 E-10 F9000\nM84 ;steppers off\nG90 ;absolute positioning\nPRINT_END",
    "machine_max_acceleration_e": [
        "4000"
    ],
    "machine_max_acceleration_extruding": [
        "2000",
        "1500"
    ],
    "machine_max_acceleration_retracting": [
        "2000",
        "1500"
    ],
    "machine_max_acceleration_x": [
        "2000",
        "3000"
    ],
    "machine_max_acceleration_y": [
        "2000",
        "3000"
    ],
    "machine_max_jerk_x": [
        "9",
        "20"
    ],
    "machine_max_jerk_y": [
        "9",
        "20"
    ],
    "machine_max_jerk_z": [
        "0.2",
        "0.4"
    ],
    "machine_max_speed_x": [
        "200",
        "500"
    ],
    "machine_max_speed_y": [
        "200",
        "500"
    ],
    "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\nG0 Z1\nG0 X0 Y0\nG92 E0\nG0 Z0.5\nG1 F1000 Y100 E20\nG92 E0\nM117 Printing...",
    "min_layer_height": [
        "0.1"
    ],
    "printable_area": [
        "0x0",
        "125x0",
        "125x125",
        "0x125"
    ],
    "printable_height": "160",
    "retraction_length": [
        "2"
    ],
    "thumbnails": [
        "120x120"
    ],
    "wipe_distance": [
        "1"
    ],
    "version": "2.0.0.0"
}