{
  "type": "machine",
  "instantiation": "false",
  "adaptive_bed_mesh_margin": "0",
  "auxiliary_fan": "0",
  "bed_custom_texture": "",
  "bed_exclude_area": ["0x0"],
  "bed_mesh_max": "99999,99999",
  "bed_mesh_min": "-99999,-99999",
  "bed_mesh_probe_distance": "50,50",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
  "best_object_pos": "0.5,0.5",
  "change_extrusion_role_gcode": "",
  "change_filament_gcode": "",
  "cooling_tube_length": "5",
  "cooling_tube_retraction": "91.5",
  "default_filament_profile": ["My Generic ABS"],
  "default_print_profile": "0.20mm Standard @MyKlipper",
  "deretraction_speed": ["30"],
  "disable_m73": "0",
  "emit_machine_limits_to_gcode": "1",
  "enable_filament_ramming": "1",
  "extra_loading_move": "-2",
  "extruder_clearance_height_to_lid": "140",
  "extruder_clearance_height_to_rod": "36",
  "extruder_clearance_radius": "65",
  "extruder_colour": ["#FCE94F"],
  "extruder_offset": ["0x0"],
  "fan_kickstart": "0",
  "fan_speedup_overhangs": "1",
  "fan_speedup_time": "0",
  "from": "system",
  "gcode_flavor": "klipper",
  "head_wrap_detect_zone": [],
  "high_current_on_filament_swap": "0",
  "host_type": "octoprint",
  "is_custom_defined": "0",
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
  "machine_end_gcode": "PRINT_END",
  "machine_load_filament_time": "0",
  "machine_max_acceleration_e": ["5000", "5000"],
  "machine_max_acceleration_extruding": ["20000", "20000"],
  "machine_max_acceleration_retracting": ["5000", "5000"],
  "machine_max_acceleration_travel": ["20000", "20000"],
  "machine_max_acceleration_x": ["2000", "20000"],
  "machine_max_acceleration_y": ["2000", "20000"],
  "machine_max_acceleration_z": ["500", "200"],
  "machine_max_jerk_e": ["2.5", "2.5"],
  "machine_max_jerk_x": ["5", "9"],
  "machine_max_jerk_y": ["5", "9"],
  "machine_max_jerk_z": ["0.2", "0.4"],
  "machine_max_speed_e": ["80", "25"],
  "machine_max_speed_x": ["200", "200"],
  "machine_max_speed_y": ["200", "200"],
  "machine_max_speed_z": ["12", "12"],
  "machine_min_extruding_rate": ["0", "0"],
  "machine_min_travel_rate": ["0", "0"],
  "machine_pause_gcode": "PAUSE",
  "machine_start_gcode": "PRINT_START MATERIAL=[filament_type]\n",
  "machine_unload_filament_time": "0",
  "manual_filament_change": "0",
  "max_layer_height": ["2"],
  "min_layer_height": ["0.1"],
  "name": "fdm_machine_common",
  "nozzle_diameter": ["1.0"],
  "nozzle_hrc": "0",
  "nozzle_type": "undefine",
  "nozzle_volume": "0",
  "parking_pos_retraction": "92",
  "pellet_modded_printer": "1",
  "preferred_orientation": "0",
  "print_host": "http://10.0.1.200/",
  "print_host_webui": "",
  "printable_area": ["0x0", "1000x0", "1000x1000", "0x1000"],
  "printable_height": "1000",
  "printer_notes": "",
  "printer_settings_id": "fdm_machine_common",
  "printer_structure": "undefine",
  "printer_technology": "FFF",
  "printer_variant": "1.0",
  "printhost_apikey": "",
  "printhost_authorization_type": "key",
  "printhost_cafile": "",
  "printhost_password": "",
  "printhost_port": "",
  "printhost_ssl_ignore_revoke": "0",
  "printhost_user": "",
  "printing_by_object_gcode": "",
  "purge_in_prime_tower": "1",
  "retract_before_wipe": ["70%"],
  "retract_length_toolchange": ["2"],
  "retract_lift_above": ["0"],
  "retract_lift_below": ["0"],
  "retract_lift_enforce": ["All Surfaces"],
  "retract_restart_extra": ["0"],
  "retract_restart_extra_toolchange": ["0"],
  "retract_when_changing_layer": ["1"],
  "retraction_length": ["0.8"],
  "retraction_minimum_travel": ["1"],
  "retraction_speed": ["30"],
  "scan_first_layer": "0",
  "silent_mode": "0",
  "single_extruder_multi_material": "1",
  "support_air_filtration": "1",
  "support_chamber_temp_control": "1",
  "support_multi_bed_types": "0",
  "template_custom_gcode": "",
  "thumbnails": ["50x50"],
  "thumbnails_format": "PNG",
  "time_cost": "0",
  "time_lapse_gcode": "",
  "upward_compatible_machine": [],
  "use_firmware_retraction": "0",
  "use_relative_e_distances": "1",
  "version": "1.9.0.2",
  "wipe": ["1"],
  "wipe_distance": ["1"],
  "z_hop": ["0.4"],
  "z_hop_types": ["Normal Lift"],
  "z_offset": "0"
}