{
    "type": "machine",
    "setting_id": "GM001",
    "name": "FlyingBear Ghost 6 0.4 nozzle",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_marlin_common",
    "printer_model": "FlyingBear Ghost 6",
    "gcode_flavor": "marlin2",
    "default_print_profile": "0.20mm Standard @FlyingBear Ghost 6",
    "nozzle_diameter": [
        "0.4"
    ],
    "printer_variant": "0.4",
    "printable_area": [
        "0x0",
        "255x0",
        "255x210",
        "0x210"
    ],
    "printable_height": "210",
    "nozzle_type": "brass",
    "auxiliary_fan": "1",
    "support_air_filtration": "1",
    "support_multi_bed_types": "1",
    "machine_max_acceleration_extruding": [
        "1500",
        "1500"
    ],
    "machine_max_acceleration_retracting": [
        "3000",
        "3000"
    ],
    "machine_max_acceleration_travel": [
        "2000",
        "2000"
    ],
    "machine_max_acceleration_x": [
        "1500",
        "1500"
    ],
    "machine_max_acceleration_y": [
        "1500",
        "1500"
    ],
    "machine_max_acceleration_z": [
        "100",
        "100"
    ],
    "machine_max_acceleration_e": [
        "2000",
        "2000"
    ],
    "machine_max_speed_x": [
        "200",
        "200"
    ],
    "machine_max_speed_y": [
        "200",
        "200"
    ],
    "machine_max_speed_z": [
        "4",
        "4"
    ],
    "machine_max_speed_e": [
        "45",
        "45"
    ],
    "machine_max_jerk_x": [
        "15",
        "15"
    ],
    "machine_max_jerk_y": [
        "15",
        "15"
    ],
    "machine_max_jerk_z": [
        "0.4",
        "0.4"
    ],
    "machine_max_jerk_e": [
        "2.0",
        "2.0"
    ],
    "max_layer_height": [
        "0.3"
    ],
    "min_layer_height": [
        "0.05"
    ],
    "printer_settings_id": "",
    "retraction_minimum_travel": [
        "3"
    ],
    "retract_before_wipe": [
        "0%"
    ],
    "retraction_length": [
        "0.8"
    ],
    "retract_length_toolchange": [
        "1"
    ],
    "retraction_speed": [
        "35"
    ],
    "deretraction_speed": [
        "35"
    ],
    "extruder_clearance_height_to_lid": "80",
    "extruder_clearance_height_to_rod": "64",
    "extruder_clearance_radius": "40",
    "z_hop": [
        "0.2"
    ],
    "wipe_distance": [
        "2"
    ],
    "single_extruder_multi_material": "1",
    "manual_filament_change": "1",
    "change_filament_gcode": "M600",
    "machine_pause_gcode": "M25",
    "default_filament_profile": [
       "FlyingBear Generic PLA"
    ],
    "machine_start_gcode": "M220 S100 ;reset feedrate\nM221 S100 ;reset flowrate\nG21 ;set units to millimeters\nG90 ;use absolute coordinates\nM82 ;absolute extrusion mode\nM107 ;turn off colling fan\n\nM140 S[bed_temperature_initial_layer] ;set bed temperature continue without waiting\nM104 S[nozzle_temperature_initial_layer] ;set hotend temperature continue without waiting\n\nG28 ;home\nG1 Z2 F1500 ;raise z\nG92 E0 ;reset extruder\n\nM190 S[bed_temperature_initial_layer] ;wait for bed temperature\nM109 S[nozzle_temperature_initial_layer] ;wait for hotend temperature\n\nG1 X20 Y20 F5000 ;start position \nG1 Z0.28 F1500 ;lower z\nG1 E4 F500 ;prime the filament\n\nG1 X20 Y20.0 Z0.28 F3000.0  ;start position \nG1 X20 Y170.0 Z0.28 F1500.0 E12 ;1st line\nG1 X20.3 F1500\nG1 X20.3 Y20.0 Z0.28 F1500.0 E18 ;2nd line\n\nG92 E0 ;reset extruder\nG1 Z2 F1500 ;raise z\nG92 E0 ;reset extruder\n",
    "machine_end_gcode": "G91 ;use relative coordinates\nG1 E-4 F1500 ;retract the filament\nG1 X5 Y5 Z0.2 F5000 ;wipe\nG1 Z5 F1500 ;raise z\nG90 ;use absolute coordinates\nG1 X10 Y210 F5000 ;park print head\n\nM107 ;turn off fan\nM104 S0 ;turn off hotend\nM140 S0 ;turn off heatbed\nM84 ;disable motors",
    "scan_first_layer": "0",
    "thumbnails": [
        "100x100",
        "320x320"
    ]
}