{
	"type": "machine",
	"setting_id": "GM001",
	"name": "Qidi X-Max 3 0.4 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_qidi_common",
	"printer_model": "Qidi X-Max 3",
	"default_print_profile": "0.20mm Standard @Qidi XMax3",
	"nozzle_diameter": [
		"0.4"
	],
	"printable_area": [
		"0x0",
		"325x0",
		"325x325",
		"0x325"
	],
	"printable_height": "320",
	"nozzle_type": "hardened_steel",
	"auxiliary_fan": "0",
	"machine_max_acceleration_extruding": [
		"20000",
		"1250"
	],
	"machine_max_acceleration_retracting": [
		"5000",
		"1250"
	],
	"machine_max_acceleration_travel": [
		"1500",
		"1250"
	],
	"machine_max_acceleration_x": [
		"20000",
		"1000"
	],
	"machine_max_acceleration_y": [
		"20000",
		"1000"
	],
	"machine_max_acceleration_z": [
		"500",
		"200"
	],
	"machine_max_speed_e": [
		"30",
		"120"
	],
	"machine_max_speed_x": [
		"500",
		"200"
	],
	"machine_max_speed_y": [
		"500",
		"200"
	],
	"machine_max_speed_z": [
		"20",
		"12"
	],
	"machine_max_jerk_e": [
		"2",
		"2.5"
	],
	"machine_max_jerk_x": [
		"10",
		"10"
	],
	"machine_max_jerk_y": [
		"10",
		"10"
	],
	"machine_max_jerk_z": [
		"3",
		"0.4"
	],
	"max_layer_height": [
		"0"
	],
	"min_layer_height": [
		"0.07"
	],
	"printer_settings_id": "Qidi",
	"retraction_minimum_travel": [
		"2"
	],
	"retract_before_wipe": [
		"0%"
	],
	"retraction_length": [
		"0.8"
	],
	"retract_length_toolchange": [
		"10"
	],
	"deretraction_speed": [
		"0"
	],
	"single_extruder_multi_material": "0",
	"change_filament_gcode": "",
	"machine_pause_gcode": "M0",
	"default_filament_profile": [
		"Qidi Generic PLA"
	],
	"machine_start_gcode": "G28\nM190 S[first_layer_bed_temperature]\nG28 Z\n;G29\nG0 X4 Y5 Z50 F6000\nM109 S[first_layer_temperature]\nM82\nG0 Z0.3 F600\nG92 E-36.45\nG1 Y120 E-27.45 F3000\nG1 X6 E-27.30\nG1 Y5 E-18.30\nG1 X8 E-18.15\nG1 Y120 E-9.15\nG1 X10 E-9\nG1 Y5 E0",
	"machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG91\nG0 Z10 F600\nG90\nG0 X0 Y0 F12000\nG0 Z[max_print_height] F600",
	"scan_first_layer": "0"
}