{
    "type": "process",
    "setting_id": "GP004",
    "name": "0.38mm Extra Draft 0.6 nozzle @Blocks_RF50",
    "from": "system",
    "inherits": "fdm_process_common 0.6 nozzle",
    "instantiation": "true",
    "layer_height": "0.38",
    "initial_layer_print_height": "0.3",
    "bottom_shell_layers": "3",
    "top_shell_layers": "4",
    "compatible_printers": [
        "BLOCKS RF50",
        "BLOCKS RF50 0.6 nozzle"
    ],
    "initial_layer_speed": "80",
    "initial_layer_infill_speed": "100",
    "outer_wall_speed": "180",
    "inner_wall_speed": "300",
    "small_perimeter_speed": "50%",
    "small_perimeter_threshold": "0",
    "sparse_infill_speed": "300",
    "internal_solid_infill_speed": "300",
    "top_surface_speed": "300",
    "gap_infill_speed": "260",
    "support_speed": "300",
    "support_interface_speed": "180",
    "travel_speed": "500",
    "default_acceleration": "15000",
    "outer_wall_acceleration": "8000",
    "inner_wall_acceleration": "15000",
    "bridge_infill_acceleration": "50%",
    "sparse_infill_acceleration": "100%",
    "internal_solid_infill_acceleration": "100%",
    "initial_layer_acceleration": "1000",
    "top_surface_acceleration": "15000",
    "travel_acceleration": "30000"
}