{
  "type": "process",
  "setting_id": "GP004",
  "name": "0.20mm Structural @Prusa XL 5T 0.4",
  "from": "system",
  "instantiation": "true",
  "inherits": "process_common_xl_5t",
  "inital_layer_height": "0.2",
  "layer_height": "0.2",
  "wall_loops": "2",
  "top_shell_layers": "5",
  "bottom_shell_layers": "4",
  "top_shell_thickness": "0.7",
  "bottom_shell_thickness": "0.5",
  "sparse_infill_density": "15%",
  "infill_anchor": "2",
  "brim_object_gap": "0.1",
  "support_threshold_angle": "40",
  "raft_first_layer_density": "80%",
  "raft_first_layer_expansion": "3.5",
  "raft_contact_distance": "0.15",
  "support_top_z_distance": "0.2",
  "support_bottom_z_distance": "0.2",
  "support_base_pattern_spacing": "2",
  "support_interface_top_layers": "5",
  "support_interface_spacing": "0.2",
  "support_object_xy_distance": "80%",
  "tree_support_bramch_diameter_angle": "5",
  "tree_support_tip_diameter": "0.8",
  "inner_wall_speed": "80",
  "small_perimeter_speed": "45",
  "outer_wall_speed": "45",
  "sparse_infill_speed": "120",
  "internal_solid_infill_speed": "140",
  "top_surface_speed": "75",
  "support_speed": "120",
  "support_interface_speed": "50",
  "bridge_speed": "50",
  "gap_infill_speed": "65",
  "overhang_1_4_speed": "15",
  "overhang_2_4_speed": "25",
  "overhang_3_4_speed": "30",
  "overhang_4_4_speed": "90%",
  "default_acceleration": "2500",
  "outer_wall_acceleration": "1500",
  "inner_wall_acceleration": "2500",
  "top_surface_acceleration": "1000",
  "internal_solid_infill_acceleration": "3000",
  "sparse_infill_acceleration": "4000",
  "bridge_acceleration": "1500",
  "initial_layer_acceleration": "500",
  "travel_acceleration": "5000",
  "line_width": "0.45",
  "initial_layer_line_width": "0.5",
  "inner_wall_line_width": "0.45",
  "outer_wall_line_width": "0.45",
  "sparse_infill_line_width": "0.45",
  "internal_solid_infill_line_width": "0.45",
  "top_surface_line_width": "0.42",
  "support_line_width": "0.36",
  "infill_wall_overlap": "15%",
  "resolution": "0.008",
  "elefant_foot_compensation": "0.2",
  "compatible_printers": [
    "Prusa XL 5T 0.4 nozzle"
  ]
}