{
  "type": "machine",
  "name": "fdm_qidi_x3_common",
  "from": "system",
  "instantiation": "false",
  "inherits": "fdm_machine_common",
	"gcode_flavor": "klipper",
  "auxiliary_fan": "1",
  "change_filament_gcode": "",
	"machine_pause_gcode": "M0",
  "support_chamber_temp_control": "1",
  "retraction_length": [
    "1"
  ],
  "retraction_speed": [
      "30"
  ],
  "z_hop": [
      "0.4"
  ],
  "thumbnails": [
    "380x380",
    "210x210"
  ],
  "thumbnails_format": "ColPic",
  "machine_start_gcode": "G28\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29 ; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 Z5 F1200\nG0 X{first_layer_print_min[0]} Y{max(0, first_layer_print_min[1] - 2)} F12000\nG0 Z0.2 F600\nG1 E3 F1800\nG0 Z0.3 F600\nG1 X{min(first_layer_print_min[0] + 30,print_bed_max[0])} E6 F600",
	"machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG90\n{if max_layer_z < max_print_height / 2}\nG1 Z{max_print_height / 2 + 10} F600\n{else}\nG1 Z{min(max_print_height, max_layer_z + 10)}\n{endif}\nG0 X5 Y{print_bed_max[1]-11} F12000\nM141 S0",
	"scan_first_layer": "0"
}