{
	"type": "machine",
	"setting_id": "GM001",
	"name": "Sovol SV06 Plus ACE 0.4 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_machine_common",
	"printer_model": "Sovol SV06 Plus ACE",
	"default_print_profile": "0.20mm Standard @Sovol SV06 Plus ACE - official",
	"nozzle_diameter": [
		"0.4"
	],
	"printable_area": [
		"0x0",
		"300x0",
		"300x300",
		"0x300"
	],
	"printable_height": "350",
	"thumbnails": [
		"96x96",
		"160x160"
	],
	"thumbnails_format": "PNG",
	"retraction_length": [
		"0.8"
	],
	"retraction_minimum_travel": [
		"1"
	],
	"machine_max_acceleration_e": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_extruding": [
		"20000",
		"20000"
	],
	"machine_max_acceleration_retracting": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_travel": [
		"20000",
		"20000"
	],
	"machine_max_acceleration_x": [
		"20000",
		"20000"
	],
	"machine_max_acceleration_y": [
		"20000",
		"20000"
	],
	"machine_max_acceleration_z": [
		"500",
		"500"
	],
	"machine_max_speed_x": [
		"500",
		"500"
	],
	"machine_max_speed_y": [
		"500",
		"500"
	],
	"machine_max_speed_e": [
		"50",
		"50"
	],
	"machine_max_speed_z": [
		"10",
		"10"
	],
	"z_hop": [
		"0.4",
		"0.4"
	],
	"z_hop_types":[
		"Auto Lift"
	],
	"max_layer_height": [
		"0.32",
		"0.32"
	],
	"retract_lift_below": [
		"343",
		"343"
	],
	"retraction_speed": [
		"40",
		"40"
	],
	"deretraction_speed": [
		"40",
		"40"
	],
	"wipe_distance": [
        "2",
		"2"
    ],
	"retract_minimum_trave": [
		"1",
		"1"
	],
	"retract_before_wipe": [
		"100",
		"100"
	],
	"retract_length_toolchange": [
		"2",
		"2"
	],
	"machine_max_jerk_e": [
        "2.5"
    ],
    "machine_max_jerk_x": [
        "9"
    ],
    "machine_max_jerk_y": [
        "9"
    ],
    "machine_max_jerk_z": [
        "0.5"
    ],
	"gcode_flavor": "klipper",
	"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
	"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG28\nG90\nG1 X0 F6000\nG1 Y-4\nG1 Z0.200 F600\nM400\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG91\nM83\nG1 E-0.200 Z5 F600\nG1 X{print_bed_max[1] / 3} F6000\nG1 Z-5 F600\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 Y1 E0.16 F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 Y1 E0.24 F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 E-0.200 Z1 F600\nM400\n\n",
	"machine_end_gcode": "END_PRINT\n",
	"default_filament_profile": [
		"Sovol SV06 Plus ACE PLA"
	]
}