{
    "type": "filament",
    "setting_id": "GFSA04",
    "name": "Prusa Generic ABS @XL",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_filament_abs",
    "nozzle_temperature_intial_layer": "255",
    "nozzle_temperature": "255",
    "hot_plate_temp_initial_layer": "100",
    "hot_plate_temp": "105",
    "slow_down_min_speed": "15",
    "filament_flow_ratio": [
        "1"
    ],
    "filament_max_volumetric_speed": [
        "12"
    ],
    "slow_down_layer_time": [
        "20"
    ],
    "fan_max_speed": [
        "15"
    ],
    "fan_min_speed": [
        "15"
    ],
    "overhang_fan_speed": [
        "25"
    ],
    "close_fan_the_first_x_layers": [
        "4"
    ],
    "filament_loading_speed_start": "19",
    "filament_loading_speed": "14",
    "filament_unloading_speed_start": "100",
    "filament_unloading_speed": "20",
    "filament_load_time": "15",
    "filament_unload_time": "12",
    "filament_cooling_moves": "5",
    "filament_cooling_initial_speed": "10",
    "filament_cooling_final_speed": "50",
    "filament_retract_lift_below": "1.5",
    "filament_start_gcode": ["; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"],
    "compatible_printers": [
        "Prusa XL 0.25 nozzle",
        "Prusa XL 0.3 nozzle",
        "Prusa XL 0.4 nozzle",
        "Prusa XL 0.5 nozzle",
        "Prusa XL 0.6 nozzle",
        "Prusa XL 0.8 nozzle"
    ]
}