{
  "type": "machine",
  "name": "fdm_klipper_common",
  "from": "system",
  "instantiation": "false",
  "inherits": "fdm_machine_common",
  "gcode_flavor": "klipper",
  "machine_max_acceleration_extruding": ["9000", "9000"],
  "machine_max_acceleration_retracting": ["9000", "9000"],
  "machine_max_acceleration_x": ["9000", "9000"],
  "machine_max_acceleration_y": ["9000", "9000"],
  "machine_max_acceleration_z": ["100", "100"],
  "machine_max_speed_e": ["60", "60"],
  "machine_max_speed_x": ["500", "200"],
  "machine_max_speed_y": ["500", "200"],
  "machine_max_speed_z": ["12", "12"],
  "machine_max_jerk_e": ["5", "5"],
  "machine_max_jerk_x": ["7", "7"],
  "machine_max_jerk_y": ["7", "7"],
  "machine_max_jerk_z": ["0.4", "0.4"],
  "machine_min_extruding_rate": ["0", "0"],
  "machine_min_travel_rate": ["0", "0"],
  "min_layer_height": ["0.05"],
  "extruder_clearance_radius": "45",
  "extruder_clearance_height_to_rod": "25",
  "retraction_minimum_travel": ["1"],
  "retract_before_wipe": ["70%"],
  "retract_when_changing_layer": ["1"],
  "retraction_length": ["1.0"],
  "z_hop": ["0.4"],
  "retract_restart_extra": ["0"],
  "retract_restart_extra_toolchange": ["0"],
  "z_hop_types": "Normal Lift",
  "machine_pause_gcode": "M601",
  "wipe": ["1"],
  "bed_exclude_area": ["0x0"],
  "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
  "machine_end_gcode": "END_PRINT",
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n"
}