{
  "type": "process",
  "accel_to_decel_enable": "0",
  "brim_type": "outer_only",
  "brim_width": "40",
  "default_acceleration": "2500",
  "default_jerk": "5",
  "elefant_foot_compensation": "0.2",
  "enable_overhang_speed": "0",
  "ensure_vertical_shell_thickness": "none",
  "exclude_object": "1",
  "extra_perimeters_on_overhangs": "1",
  "from": "User",
  "gap_fill_target": "nowhere",
  "gap_infill_speed": "120",
  "infill_anchor_max": "30",
  "infill_jerk": "5",
  "infill_wall_overlap": "30%",
  "inherits": "fdm_process_common",
  "initial_layer_acceleration": "2500",
  "initial_layer_jerk": "5",
  "initial_layer_line_width": "9.5",
  "initial_layer_print_height": "1",
  "initial_layer_speed": "40",
  "inner_wall_acceleration": "2500",
  "inner_wall_jerk": "5",
  "inner_wall_line_width": "9.5",
  "inner_wall_speed": "120",
  "internal_solid_infill_line_width": "9.5",
  "internal_solid_infill_speed": "120",
  "is_custom_defined": "0",
  "layer_height": "4",
  "line_width": "9.5",
  "name": "4.00mm Standard",
  "outer_wall_acceleration": "2500",
  "outer_wall_jerk": "5",
  "outer_wall_line_width": "9.5",
  "outer_wall_speed": "120",
  "overhang_1_4_speed": "20",
  "overhang_2_4_speed": "30",
  "overhang_3_4_speed": "40",
  "overhang_4_4_speed": "40",
  "overhang_reverse": "1",
  "overhang_reverse_internal_only": "1",
  "overhang_reverse_threshold": "0%",
  "print_settings_id": "4.00mm Standard",
  "role_based_wipe_speed": "0",
  "seam_position": "aligned",
  "skirt_distance": "10",
  "sparse_infill_density": "10%",
  "sparse_infill_line_width": "9.5",
  "sparse_infill_pattern": "grid",
  "sparse_infill_speed": "120",
  "spiral_mode_max_xy_smoothing": "1e+07",
  "spiral_mode_smooth": "1",
  "support_line_width": "9.5",
  "support_speed": "120",
  "thick_internal_bridges": "0",
  "top_shell_layers": "0",
  "top_surface_acceleration": "2500",
  "top_surface_jerk": "5",
  "top_surface_line_width": "9.5",
  "top_surface_speed": "120",
  "travel_acceleration": "2500",
  "travel_jerk": "7",
  "travel_speed": "250",
  "version": "0.0.0.0",
  "wall_generator": "classic",
  "wall_loops": "1",
  "wipe_on_loops": "1",
  "wipe_speed": "40",
  "xy_contour_compensation": "-0.15",
  "xy_hole_compensation": "0.2",
  "instantiation": "true",
  "compatible_printers": ["ginger G1 8.0 nozzle"]
}