{
  "type": "machine",
  "name": "Flashforge Guider 3 Ultra 0.6 Nozzle",
  "inherits": "fdm_guider3_common",
  "setting_id": "GM001",
  "from": "system",
  "instantiation": "true",
  "printer_variant": "0.6",
  "printer_model": "Flashforge Guider 3 Ultra",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
  "change_filament_gcode": "; change filament start\n{if total_toolchanges == 0 and current_extruder == 1}\nM104 S0 T0\n{elsif total_toolchanges > 0 and current_extruder == 0}\nM104 S{nozzle_temperature[0]}\n{if layer_z == initial_layer_print_height}\nT1\nM109 S{nozzle_temperature_initial_layer[1]} T1\n{else}\nT1\nM109 S{nozzle_temperature[1]} T1\n{endif}\n{elsif total_toolchanges > 0 and current_extruder == 1}\nM104 S{nozzle_temperature[1]}\n{if layer_z == initial_layer_print_height}\nT0\nM109 S{nozzle_temperature_initial_layer[0]} T0\n{else}\nT0\nM109 S{nozzle_temperature[0]} T0\n{endif}\n{endif}\n",
  "cooling_tube_length": "0",
  "cooling_tube_retraction": "0",
  "default_filament_profile": [ "Flashforge Generic PLA @G3U 0.6 Nozzle" ],
  "default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
  "deretraction_speed": [
    "30"
  ],
  "extra_loading_move": "0",
  "extruder_clearance_height_to_rod": "50",
  "extruder_clearance_radius": "57",
  "is_custom_defined": "0",
  "machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 T0\nM104 S0 T1",
  "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\n{if total_toolchanges < 1}\nM109 S[nozzle_temperature_initial_layer] T[initial_extruder]\nT[initial_extruder]\nG21\nG90\nM83\nG1 Z0.3 F400\nG1 X-145 Y{random(-160,-152)} F4800\nG1 X-95 Y{random(-160,-152)} E30 F400\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X-80 F4800 ; move away from purge line\n{else}\nM109 S{nozzle_temperature_initial_layer[0] - 30} T0\nM109 S{nozzle_temperature_initial_layer[1] - 30} T1\n{if initial_extruder==0}\nM109 S{nozzle_temperature_initial_layer[1]} T1\nT1\nG21\nG90\nM83\nG1 Z0.3 F400\nG1 X-145 Y{random(-160,-152)} F4800\nG1 X-95 Y{random(-160,-152)} E30 F400\nG1 E-15 F1800\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X-80 F4800 ; move away from purge line\nM104 S{nozzle_temperature_initial_layer[1]-30} T1\nM109 S{nozzle_temperature_initial_layer[0]} T0\nT0\nG1 Z0.3 F400\nG1 X145 Y{random(-160,-152)} F4800\nG1 X95 Y{random(-160,-152)} E30 F400\nG1 E-0.8 F1800\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X80 F4800 ; move away from purge line\nG92 E0\n{elsif current_extruder == 1}\nM109 S{nozzle_temperature_initial_layer[0]} T0\nT0\nG21\nG90\nM83\nG1 Z0.3 F400\nG1 X-145 Y{random(-160,-152)} F4800\nG1 X-95 Y{random(-160,-152)} E30 F400\nG1 E-15 F1800\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X-80 F4800 ; move away from purge line\nM104 S{nozzle_temperature_initial_layer[0]-30} T0\nM109 S{nozzle_temperature_initial_layer[1]} T1\nT1\nG1 Z0.3 F400\nG1 X145 Y{random(-160,-152)} F4800\nG1 X95 Y{random(-160,-152)} E30 F400\nG1 E-0.8 F1800\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X80 F4800 ; move away from purge line\nG92 E0\n{endif}\n{endif}\n\n",
  "max_layer_height": [
    "0.42"
  ],
  "min_layer_height": [
    "0.18"
  ],
  "nozzle_diameter": [
    "0.6"
  ],
  "parking_pos_retraction": "0",
  "printable_area": [
    "-150x-165",
    "150x-165",
    "150x165",
    "-150x165"
  ],
  "printable_height": "600",
  "printer_settings_id": "Flashforge Guider 3 Ultra 0.6 Nozzle",
  "retract_length_toolchange": [
    "15"
  ],
  "retract_restart_extra_toolchange": [
    "-0.8"
  ],
  "retraction_length": [
    "1.2"
  ],
  "retraction_speed": [
    "40"
  ],
  "version": "1.8.0.0",
  "z_hop": [
    "0.6"
  ],
  "z_hop_types": [
    "Spiral Lift"
  ]
}