{
	"type": "machine",
	"name": "fdm_coprint_common",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_machine_common",
	"default_print_profile": "0.20mm Standard @Co Print ChromaSet 0.4",
    "printer_variant": "0.4",
	"nozzle_diameter": [
		"0.4"
	],
    "retract_before_wipe": [
        "70%"
    ],
	"printable_area": [
		"0x0",
		"350x0",
		"350x350",
		"0x350"
	],
	"printable_height": "345",
	"gcode_flavor": "klipper",
    "retraction_length": [
        "1"
    ],
    "machine_max_speed_e": [
        "100"
    ],
    "machine_max_speed_x": [
        "500"
    ],
    "machine_max_speed_y": [
        "500"
    ],
    "machine_max_speed_z": [
        "20"
    ],
    "machine_max_acceleration_e": [
        "2500"
    ],
    "machine_max_acceleration_extruding": [
        "5000"
    ],
    "machine_max_acceleration_retracting": [
        "2500"
    ],
	"machine_max_acceleration_travel": [
        "40000"
    ],
    "machine_max_acceleration_x": [
        "5000"
    ],
    "machine_max_acceleration_y": [
        "5000"
    ],
    "machine_max_acceleration_z": [
        "500"
    ],
    "machine_max_jerk_e": [
        "2.5"
    ],
    "machine_max_jerk_x": [
        "10"
    ],
    "machine_max_jerk_y": [
        "10"
    ],
    "machine_max_jerk_z": [
        "0.2"
    ],
	"z_hop": [
        "0.2"
    ],
	"retraction_speed": [
        "50"
    ],
	"deretraction_speed": [
        "50"
    ],
	"retraction_minimum_travel": [
        "1"
    ],
    "retract_length_toolchange": [
        "2"
    ],
	"wipe_distance": [
        "2"
    ],
	"thumbnails": [
		"300x300",
        "400x300",
        "32x32"
	],
    "retract_lift_below": [
        "343"
    ],
	"thumbnails_format": "PNG",
	"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
	"machine_start_gcode": "start_print  EXTRUDER=[initial_extruder] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
    "machine_end_gcode": "end_print",
    "default_filament_profile": [
		"Co Print PLA"
	],
    "extruder_clearance_radius": [
        "65"
    ],
    "extruder_clearance_height_to_rod": [
        "36"
    ],
    "extruder_clearance_height_to_lid": [
        "36"
    ],
    "min_layer_height": [
        "0.08"
    ],
    "max_layer_height": [
        "0.32"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "cooling_tube_retraction": [
        "0"
    ],
    "cooling_tube_length": [
        "0"
    ],
    "parking_pos_retraction": [
        "10"
    ],
    "extra_loading_move": [
        "0"
    ]


}