{
    "type": "machine",
    "setting_id": "GM006",
    "name": "Artillery Sidewinder X4 Plus 0.4 nozzle",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_machine_common",
    "printer_model": "Artillery Sidewinder X4 Plus",
    "printer_settings_id": "Artillery X4Plus 0.4 nozzle",
    "nozzle_diameter": [
        "0.4"
    ],
    "default_filament_profile": [
        "Artillery PLA Basic"
    ],
    "adaptive_bed_mesh_margin": "0",
    "auxiliary_fan": "0",
    "bbl_use_printhost": "0",
    "bed_custom_model": "",
    "bed_custom_texture": "",
    "bed_exclude_area": [
        "0x0"
    ],
    "bed_mesh_max": "99999,99999",
    "bed_mesh_min": "-99999,-99999",
    "bed_mesh_probe_distance": "50,50",
    "before_layer_change_gcode": "\n",
    "best_object_pos": "0.5,0.5",
    "change_extrusion_role_gcode": "",
    "change_filament_gcode": "",
    "cooling_tube_length": "5",
    "cooling_tube_retraction": "91.5",
    "default_print_profile": "0.20mm Standard @Artillery Genius",
    "deretraction_speed": [
        "0"
    ],
    "disable_m73": "0",
    "emit_machine_limits_to_gcode": "0",
    "enable_filament_ramming": "1",
    "extra_loading_move": "-2",
    "extruder_clearance_height_to_lid": "140",
    "extruder_clearance_height_to_rod": "36",
    "extruder_clearance_radius": "65",
    "extruder_colour": [
        "#018001"
    ],
    "extruder_offset": [
        "0x0"
    ],
    "fan_kickstart": "0",
    "fan_speedup_overhangs": "1",
    "fan_speedup_time": "0",
    "gcode_flavor": "klipper",
    "head_wrap_detect_zone": [],
    "high_current_on_filament_swap": "0",
    "host_type": "octoprint",
    "is_custom_defined": "0",
    "layer_change_gcode": "G92 E0",
    "machine_end_gcode": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 E-1 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X-5 Y305 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
    "machine_load_filament_time": "0",
    "machine_max_acceleration_e": [
        "6000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "6000",
        "1250"
    ],
    "machine_max_acceleration_retracting": [
        "6000",
        "1250"
    ],
    "machine_max_acceleration_travel": [
        "1000",
        "1250"
    ],
    "machine_max_acceleration_x": [
        "6000",
        "1000"
    ],
    "machine_max_acceleration_y": [
        "6000",
        "1000"
    ],
    "machine_max_acceleration_z": [
        "500",
        "200"
    ],
    "machine_max_jerk_e": [
        "3",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "7",
        "10"
    ],
    "machine_max_jerk_y": [
        "7",
        "10"
    ],
    "machine_max_jerk_z": [
        "0.2",
        "0.4"
    ],
    "machine_max_speed_e": [
        "120",
        "120"
    ],
    "machine_max_speed_x": [
        "500",
        "200"
    ],
    "machine_max_speed_y": [
        "500",
        "200"
    ],
    "machine_max_speed_z": [
        "12",
        "12"
    ],
    "machine_min_extruding_rate": [
        "0",
        "0"
    ],
    "machine_min_travel_rate": [
        "0",
        "0"
    ],
    "machine_pause_gcode": "M600",
    "machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X230 Y300 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y20  F4000\nG1 X230 F4000\nG1 Z-1  F600 \nG1 X270 F4000\nG1 Y25  F4000\nG1 X230 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=300\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X200 Y0.8 Z0.3 F1800.0 E20.0;draw line\nG92 E0\nG1 X200 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X100 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X100 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X180 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X180 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0",
    "machine_unload_filament_time": "0",
    "manual_filament_change": "0",
    "max_layer_height": [
        "0.32"
    ],
    "min_layer_height": [
        "0.08"
    ],
    "nozzle_hrc": "0",
    "nozzle_type": "brass",
    "nozzle_volume": "0",
    "parking_pos_retraction": "92",
    "preferred_orientation": "0",
    "print_host": "192.168.0.249",
    "print_host_webui": "",
    "printable_area": [
        "0x0",
        "300x0",
        "300x310",
        "0x310"
    ],
    "printable_height": "400",
    "printer_notes": "",
    "printer_structure": "undefine",
    "printer_technology": "FFF",
    "printer_variant": "0.4",
    "printhost_apikey": "",
    "printhost_authorization_type": "key",
    "printhost_cafile": "",
    "printhost_password": "",
    "printhost_port": "",
    "printhost_ssl_ignore_revoke": "0",
    "printhost_user": "",
    "printing_by_object_gcode": "",
    "purge_in_prime_tower": "1",
    "retract_before_wipe": [
        "0%"
    ],
    "retract_length_toolchange": [
        "10"
    ],
    "retract_lift_above": [
        "0"
    ],
    "retract_lift_below": [
        "0"
    ],
    "retract_lift_enforce": [
        "All Surfaces"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0"
    ],
    "retract_when_changing_layer": [
        "1"
    ],
    "retraction_length": [
        "1.3"
    ],
    "retraction_minimum_travel": [
        "2"
    ],
    "retraction_speed": [
        "30"
    ],
    "scan_first_layer": "0",
    "silent_mode": "0",
    "single_extruder_multi_material": "1",
    "support_air_filtration": "1",
    "support_chamber_temp_control": "1",
    "support_multi_bed_types": "0",
    "template_custom_gcode": "",
    "thumbnails": [
        "300x300"
    ],
    "thumbnails_format": "PNG",
    "time_cost": "0",
    "time_lapse_gcode": "",
    "upward_compatible_machine": [],
    "use_firmware_retraction": "0",
    "use_relative_e_distances": "1",
    "version": "2.0.2.0",
    "wipe": [
        "0"
    ],
    "wipe_distance": [
        "1"
    ],
    "z_hop": [
        "0.4"
    ],
    "z_hop_types": [
        "Normal Lift"
    ],
    "z_offset": "0"
}