{
  "type": "machine",
  "setting_id": "GM_GEEETECH_039",
  "name": "Geeetech M1 0.2 nozzle",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_geeetech_common",
  "printer_model": "Geeetech M1",
  "default_filament_profile": [
    "Generic PLA @Geeetech"
  ],
  "printer_variant": "0.2",
  "default_print_profile": "0.10mm Standard @Geeetech M1 0.2 nozzle",
  "nozzle_diameter": [
    "0.2"
  ],
  "extruder_type": [
	"Direct"
		],
    "machine_max_acceleration_e": [
        "2000",
        "2000"
    ],
    "machine_max_acceleration_extruding": [
        "2000",
        "2000"
    ],
    "machine_max_acceleration_retracting": [
        "2000",
        "2000"
    ],
    "machine_max_acceleration_travel": [
        "3000",
        "3000"
    ],
    "machine_max_acceleration_x": [
        "3000",
        "3000"
    ],
    "machine_max_acceleration_y": [
        "3000",
        "3000"
    ],
    "machine_max_acceleration_z": [
        "500",
        "500"
    ],
    "machine_max_speed_e": [
        "60",
        "60"
    ],
    "machine_max_speed_x": [
        "300",
        "300"
    ],
    "machine_max_speed_y": [
        "300",
        "300"
    ],
    "machine_max_speed_z": [
        "25",
        "25"
    ],
    "machine_max_jerk_e": [
        "10",
        "10"
    ],
    "machine_max_jerk_x": [
        "10",
        "10"
    ],
    "machine_max_jerk_y": [
        "10",
        "10"
    ],
    "machine_max_jerk_z": [
        "3",
        "3"
    ],		
  "max_layer_height": [
        "0.14"
    ],
  "min_layer_height": [
        "0.04"
    ],
    "retraction_length": [
        "1"
    ],
    "retraction_speed": [
        "40"
    ],
    "deretraction_speed": [
        "40"
    ],	
  "printable_area": [
    "0x0",
    "105x0",
    "105x105",
    "0x105"
  ],
  "printable_height": "95",
  "retract_lift_below":[
    "95"
  ],
  "machine_start_gcode": ";Geeetech M1 official wiki URL for M1：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
  "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
  "nozzle_type": "brass",
  "auxiliary_fan": "0"
}