{
  "accel_to_decel_enable": "0",
  "accel_to_decel_factor": "50%",
  "bottom_shell_layers": "3",
  "bottom_shell_thickness": "0",
  "bottom_solid_infill_flow_ratio": "1",
  "bottom_surface_pattern": "monotonic",
  "bridge_acceleration": "50%",
  "bridge_angle": "0",
  "bridge_density": "100%",
  "bridge_flow": "0.95",
  "bridge_no_support": "0",
  "bridge_speed": "50",
  "brim_object_gap": "0.1",
  "brim_type": "auto_brim",
  "brim_width": "5",
  "compatible_printers": "Kingroon KP3S PRO S1 0.4 nozzle",
  "compatible_printers_condition": "",
  "default_acceleration": "3000",
  "default_jerk": "0",
  "detect_narrow_internal_solid_infill": "1",
  "detect_overhang_wall": "1",
  "detect_thin_wall": "0",
  "draft_shield": "disabled",
  "elefant_foot_compensation": "0",
  "enable_arc_fitting": "0",
  "enable_overhang_speed": "1",
  "enable_prime_tower": "0",
  "enable_support": "1",
  "enforce_support_layers": "0",
  "ensure_vertical_shell_thickness": "1",
  "exclude_object": "1",
  "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
  "filter_out_gap_fill": "0",
  "flush_into_infill": "0",
  "flush_into_objects": "0",
  "flush_into_support": "1",
  "from": "system",
  "fuzzy_skin": "none",
  "fuzzy_skin_point_distance": "0.8",
  "fuzzy_skin_thickness": "0.3",
  "gap_infill_speed": "100",
  "gcode_add_line_number": "0",
  "gcode_comments": "0",
  "gcode_label_objects": "1",
  "independent_support_layer_height": "1",
  "infill_anchor": "400%",
  "infill_anchor_max": "20",
  "infill_combination": "0",
  "infill_direction": "45",
  "infill_jerk": "9",
  "infill_wall_overlap": "25%",
  "inherits": "fdm_process_common",
  "initial_layer_acceleration": "700",
  "initial_layer_infill_speed": "105",
  "initial_layer_jerk": "9",
  "initial_layer_line_width": "0.5",
  "initial_layer_print_height": "0.2",
  "initial_layer_speed": "50",
  "initial_layer_travel_speed": "100%",
  "inner_wall_acceleration": "300",
  "inner_wall_jerk": "9",
  "inner_wall_line_width": "0.45",
  "inner_wall_speed": "100",
  "interface_shells": "0",
  "internal_bridge_support_thickness": "0",
  "internal_solid_infill_acceleration": "100%",
  "internal_solid_infill_line_width": "0.42",
  "internal_solid_infill_speed": "100",
  "ironing_flow": "10%",
  "ironing_spacing": "0.15",
  "ironing_speed": "30",
  "ironing_type": "no ironing",
  "layer_height": "0.2",
  "line_width": "0.42",
  "max_bridge_length": "10",
  "max_travel_detour_distance": "0",
  "min_bead_width": "85%",
  "min_feature_size": "25%",
  "minimum_sparse_infill_area": "15",
  "name": "0.20mm @Kingroon KP3S PRO S1 (0.4 nozzle)",
  "only_one_wall_first_layer": "0",
  "only_one_wall_top": "0",
  "ooze_prevention": "0",
  "outer_wall_acceleration": "3000",
  "outer_wall_jerk": "9",
  "outer_wall_line_width": "0.42",
  "outer_wall_speed": "80",
  "overhang_1_4_speed": "0",
  "overhang_2_4_speed": "50",
  "overhang_3_4_speed": "30",
  "overhang_4_4_speed": "10",
  "overhang_speed_classic": "0",
  "post_process": [],
  "precise_outer_wall": "0",
  "prime_tower_brim_width": "3",
  "prime_tower_width": "35",
  "prime_volume": "45",
  "print_flow_ratio": "1",
  "print_sequence": "by layer",
  "print_settings_id": "",
  "raft_contact_distance": "0.1",
  "raft_expansion": "1.5",
  "raft_first_layer_density": "90%",
  "raft_first_layer_expansion": "2",
  "raft_layers": "0",
  "reduce_crossing_wall": "0",
  "reduce_infill_retraction": "1",
  "resolution": "0.012",
  "role_based_wipe_speed": "1",
  "seam_gap": "15%",
  "seam_position": "aligned",
  "skirt_distance": "2",
  "skirt_height": "1",
  "skirt_loops": "2",
  "slice_closing_radius": "0.049",
  "slicing_mode": "regular",
  "slow_down_layers": "0",
  "small_perimeter_speed": "50%",
  "small_perimeter_threshold": "0",
  "solid_infill_filament": "1",
  "sparse_infill_acceleration": "100%",
  "sparse_infill_density": "15%",
  "sparse_infill_filament": "1",
  "sparse_infill_line_width": "0.45",
  "sparse_infill_pattern": "gyroid",
  "sparse_infill_speed": "100",
  "spiral_mode": "0",
  "standby_temperature_delta": "-5",
  "support_angle": "0",
  "support_base_pattern": "rectilinear",
  "support_base_pattern_spacing": "2.5",
  "support_bottom_interface_spacing": "0.5",
  "support_bottom_z_distance": "0.2",
  "support_critical_regions_only": "0",
  "support_expansion": "0",
  "support_filament": "0",
  "support_interface_bottom_layers": "2",
  "support_interface_filament": "0",
  "support_interface_loop_pattern": "0",
  "support_interface_pattern": "rectilinear",
  "support_interface_spacing": "0.5",
  "support_interface_speed": "80",
  "support_interface_top_layers": "2",
  "support_line_width": "0.42",
  "support_object_xy_distance": "0.35",
  "support_on_build_plate_only": "0",
  "support_speed": "150",
  "support_style": "default",
  "support_threshold_angle": "30",
  "support_top_z_distance": "0.2",
  "support_type": "tree(auto)",
  "thick_bridges": "0",
  "timelapse_type": "0",
  "top_shell_layers": "4",
  "top_shell_thickness": "0.8",
  "top_solid_infill_flow_ratio": "1",
  "top_surface_acceleration": "3000",
  "top_surface_jerk": "9",
  "top_surface_line_width": "0.42",
  "top_surface_pattern": "monotonic",
  "top_surface_speed": "60",
  "travel_acceleration": "3000",
  "travel_jerk": "12",
  "travel_speed": "150",
  "travel_speed_z": "0",
  "tree_support_adaptive_layer_height": "1",
  "tree_support_auto_brim": "1",
  "tree_support_branch_angle": "45",
  "tree_support_branch_diameter": "5",
  "tree_support_branch_distance": "5",
  "tree_support_brim_width": "3",
  "tree_support_wall_count": "0",
  "version": "1.6.0.0",
  "wall_distribution_count": "1",
  "wall_filament": "1",
  "wall_generator": "arachne",
  "wall_infill_order": "inner wall/outer wall/infill",
  "wall_loops": "3",
  "wall_transition_angle": "10",
  "wall_transition_filter_deviation": "25%",
  "wall_transition_length": "100%",
  "wipe_on_loops": "1",
  "wipe_speed": "80%",
  "wipe_tower_no_sparse_layers": "0",
  "xy_contour_compensation": "0",
  "xy_hole_compensation": "0"
}