{
  "type": "machine",
  "setting_id": "GM001",
  "name": "Comgrow T300 0.4 nozzle",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_comgrow_common",
  "printer_model": "Comgrow T300",
  "nozzle_diameter": [
    "0.4"
  ],
  "printable_area": [
    "0x0",
    "300x0",
    "300x300",
    "0x300"
  ],
  "printable_height": "350",
  "thumbnails": [
		"64x64",
		"160x160",
		"176x176"
	],
	"thumbnails_format": "JPG",
  "before_layer_change_gcode": "",
	"retraction_length": [
    "0.8"
  ],
  "machine_max_acceleration_e": [
    "5000"
  ],
  "machine_max_acceleration_extruding": [
    "20000"
  ],
  "machine_max_acceleration_retracting": [
    "5000"
  ],
  "machine_max_acceleration_x": [
    "12000"
  ],
  "machine_max_acceleration_y": [
    "12000"
  ],
  "machine_max_acceleration_z": [
    "500"
  ],
  "machine_max_speed_x": [
    "500"
  ],
  "machine_max_speed_y": [
    "500"
  ],
  "machine_max_speed_e": [
    "50"
  ],
  "machine_max_speed_z": [
    "20"
  ],
  "machine_max_jerk_x": [
    "9"
  ],
  "machine_max_jerk_y": [
    "9"
  ],
  "machine_max_jerk_z": [
    "0.25"
  ],
  "machine_max_jerk_e": [
    "3"
  ],
  "z_hop": [
    "0.4"
  ],
  "max_layer_height": [
    "0.32"
  ],
  "retract_lift_below": [
    "348"
  ],
  "retraction_speed": [
    "50"
  ],
  "deretraction_speed": [
    "50"
  ],
  "machine_start_gcode": "G28\nG90\nG1 X0 F3000\nG1 Z0.300 F600\nG1 Y0 F3000\nG91 \nG1 X-2 Y-6 F3000\nSTART_PRINT\nM400\nG90\nM83\nG90\nG1 X0 F3000\nG1 Z0.300 F600\nG1 Y0 F3000\nG91 \nG1 X-2 Y-6 F3000\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG1 E25 F480\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X90.000 F6000\nG1 Z-5.200 F600\nG1 X60.000 E14.4 F3000\nG1 X60.000 E9.6 F3000\nG1 Y1 E0.16 F3000\nG1 X-60.000 E9.6 F3000\nG1 X-60.000 E14.4 F3000\nG1 Y1 E0.16 F3000\nG1 X60.000 E14.4 F3000\nG1 X60.000 E9.6 F3000\nG1 E-0.100 Z0.5 F600\nM400\n\n",
  "machine_end_gcode": "END_PRINT\n"
}