{
  "type": "machine",
  "setting_id": "GM001",
  "name": "MyMarlin 0.4 nozzle",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_machine_common",
  "printer_model": "MyMarlin",
  "gcode_flavor": "marlin",
  "machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors",
  "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0",
  "max_layer_height": [
    "0.32"
  ],
  "retraction_length": [
    "0.9"
  ],
  "retraction_minimum_travel": [
    "1"
  ],
  "retraction_speed": [
    "45"
  ],
  "deretraction_speed": [
    "35"
  ],
  "version": "1.5.1.2",
  "wipe": [
    "0"
  ],
  "z_hop": [
    "0.4"
  ],
  "nozzle_diameter": [
    "0.4"
  ],
  "printable_area": [
    "0x0",
    "250x0",
    "250x250",
    "0x250"
  ],
  "printable_height": "250"
}