{
  "type": "filament",
  "filament_id": "GFL99",
  "setting_id": "GFSA04",
  "name": "Flashforge Generic ASA",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_filament_asa",
  "additional_cooling_fan_speed": [
    "0"
  ],
  "bed_temperature_difference": [
    "10"
  ],
  "chamber_temperature": "0",
  "close_fan_the_first_x_layers": [
    "2"
  ],
  "compatible_printers": [
    "Flashforge Adventurer 5M Pro 0.4 Nozzle"
  ],
  "compatible_printers_condition": "",
  "compatible_prints": [],
  "compatible_prints_condition": "",
  "cool_plate_temp": [
    "60"
  ],
  "cool_plate_temp_initial_layer": [
    "60"
  ],
  "default_filament_colour": [
    ""
  ],
  "enable_overhang_bridge_fan": [
    "1"
  ],
  "enable_pressure_advance": [
    "1"
  ],
  "eng_plate_temp": [
    "60"
  ],
  "eng_plate_temp_initial_layer": [
    "60"
  ],
  "fan_cooling_layer_time": [
    "30"
  ],
  "fan_max_speed": [
    "20"
  ],
  "fan_min_speed": [
    "10"
  ],
  "filament_cost": [
    "20"
  ],
  "filament_density": [
    "1.04"
  ],
  "filament_deretraction_speed": [
    "nil"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_flow_ratio": [
    "0.98"
  ],
  "filament_is_support": [
    "0"
  ],
  "filament_max_volumetric_speed": [
    "18"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "filament_retract_when_changing_layer": [
    "nil"
  ],
  "filament_retraction_length": [
    "nil"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_retraction_speed": [
    "nil"
  ],
  "filament_settings_id": [
    "Flashforge  ASA"
  ],
  "filament_shrink": [
    "100%"
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_start_gcode": [
    "; filament start gcode \n;right_extruder_material:ASA"
  ],
  "filament_end_gcode": [
    "; filament end gcode\n"
  ],
  "filament_type": [
    "ASA"
  ],
  "filament_vendor": [
    "Generic"
  ],
  "filament_wipe": [
    "nil"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "filament_z_hop": [
    "nil"
  ],
  "filament_z_hop_types": [
    "nil"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "hot_plate_temp": [
    "105"
  ],
  "hot_plate_temp_initial_layer": [
    "105"
  ],
  "nozzle_temperature": [
    "260"
  ],
  "nozzle_temperature_initial_layer": [
    "260"
  ],
  "nozzle_temperature_range_high": [
    "270"
  ],
  "nozzle_temperature_range_low": [
    "230"
  ],
  "overhang_fan_speed": [
    "80"
  ],
  "overhang_fan_threshold": [
    "25%"
  ],
  "pressure_advance": [
    "0.04"
  ],
  "reduce_fan_stop_start_freq": [
    "1"
  ],
  "required_nozzle_HRC": [
    "0"
  ],
  "slow_down_for_layer_cooling": [
    "1"
  ],
  "slow_down_layer_time": [
    "5"
  ],
  "slow_down_min_speed": [
    "20"
  ],
  "support_material_interface_fan_speed": [
    "80"
  ],
  "temperature_vitrification": [
    "100"
  ],
  "textured_plate_temp": [
    "60"
  ],
  "textured_plate_temp_initial_layer": [
    "60"
  ]
}