{
    "type": "machine",
    "setting_id": "GM001",
    "name": "Creality CR-10 SE 0.4 nozzle",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_creality_common",
    "printer_model": "Creality CR-10 SE",
    "printer_variant": "0.4",
    "printer_structure": "i3",
    "gcode_flavor": "klipper",
    "default_print_profile": "0.20mm Standard @Creality CR10SE 0.4",
    "nozzle_diameter": [
      "0.4"
    ],
    "printable_area": [
      "0x0",
      "220x0",
      "220x220",
      "0x220"
    ],
    "printable_height": "265",
    "extruder_clearance_height_to_rod": "36",
    "extruder_clearance_height_to_lid": "140",
    "extruder_clearance_radius": "65",
    "nozzle_type": "hardened_steel",
    "support_air_filtration": "1",
    "support_chamber_temp_control": "1",
    "auxiliary_fan": "0",
    "machine_max_acceleration_extruding": [
      "5000",
      "5000"
    ],
    "machine_max_acceleration_retracting": [
      "5000",
      "5000"
    ],
    "machine_max_acceleration_travel": [
      "20000",
      "20000"
    ],
    "machine_max_acceleration_x": [
      "8000",
      "8000"
    ],
    "machine_max_acceleration_y": [
      "8000",
      "8000"
    ],
    "machine_max_acceleration_z": [
      "500",
      "200"
    ],
    "machine_max_acceleration_e": [
      "5000",
      "5000"
    ],
    "machine_max_speed_e": [
      "100",
      "100"
    ],
    "machine_max_speed_x": [
      "600",
      "600"
    ],
    "machine_max_speed_y": [
      "600",
      "600"
    ],
    "machine_max_speed_z": [
      "30",
      "30"
    ],
    "machine_max_jerk_e": [
      "2.5",
      "2.5"
    ],
    "machine_max_jerk_x": [
      "10",
      "10"
    ],
    "machine_max_jerk_y": [
      "10",
      "10"
    ],
    "machine_max_jerk_z": [
      "2",
      "2"
    ],
    "max_layer_height": [
      "0.32"
    ],
    "min_layer_height": [
      "0.08"
    ],
    "printer_settings_id": "Creality",
    "retraction_minimum_travel": [
      "2"
    ],
    "retract_before_wipe": [
      "70%"
    ],
    "retraction_length": [
      "0.8"
    ],
    "retract_length_toolchange": [
      "2"
    ],
    "retraction_speed": [
      "30"
    ],
    "deretraction_speed": [
      "40"
    ],
    "single_extruder_multi_material": "1",
    "change_filament_gcode": "M600",
    "machine_pause_gcode": "M25",
    "default_filament_profile": [
      "Creality Generic PLA"
    ],
    "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
    "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
    "scan_first_layer": "0",
    "thumbnails": [
      "96x96",
      "300x300"
    ]
}