{
  "type": "machine",
  "name": "fdm_klipper_common",
  "from": "system",
  "instantiation": "false",
  "inherits": "fdm_machine_common",
  "gcode_flavor": "klipper",
  "machine_max_acceleration_e": [
    "5000",
    "5000"
  ],
  "machine_max_acceleration_extruding": [
    "20000",
    "20000"
  ],
  "machine_max_acceleration_retracting": [
    "5000",
    "5000"
  ],
  "machine_max_acceleration_travel": [
    "9000",
    "9000"
  ],
  "machine_max_acceleration_x": [
    "20000",
    "20000"
  ],
  "machine_max_acceleration_y": [
    "20000",
    "20000"
  ],
  "machine_max_acceleration_z": [
    "500",
    "200"
  ],
  "machine_max_speed_e": [
    "25",
    "25"
  ],
  "machine_max_speed_x": [
    "500",
    "200"
  ],
  "machine_max_speed_y": [
    "500",
    "200"
  ],
  "machine_max_speed_z": [
    "12",
    "12"
  ],
  "machine_max_jerk_e": [
    "2.5",
    "2.5"
  ],
  "machine_max_jerk_x": [
    "9",
    "9"
  ],
  "machine_max_jerk_y": [
    "9",
    "9"
  ],
  "machine_max_jerk_z": [
    "0.2",
    "0.4"
  ],
  "machine_min_extruding_rate": [
    "0",
    "0"
  ],
  "machine_min_travel_rate": [
    "0",
    "0"
  ],
  "max_layer_height": [
    "0.28"
  ],
  "min_layer_height": [
    "0.08"
  ],
  "printable_height": "250",
  "extruder_clearance_radius": "65",
  "extruder_clearance_height_to_rod": "36",
  "extruder_clearance_height_to_lid": "140",
  "printer_settings_id": "",
  "printer_technology": "FFF",
  "printer_variant": "0.4",
  "retraction_minimum_travel": [
    "1"
  ],
  "retract_before_wipe": [
    "70%"
  ],
  "retract_when_changing_layer": [
    "1"
  ],
  "retraction_length": [
    "0.8"
  ],
  "retract_length_toolchange": [
    "2"
  ],
  "z_hop": [
    "0.4"
  ],
  "retract_restart_extra": [
    "0"
  ],
  "retract_restart_extra_toolchange": [
    "0"
  ],
  "retraction_speed": [
    "30"
  ],
  "deretraction_speed": [
    "30"
  ],
  "z_hop_types": "Normal Lift",
  "silent_mode": "0",
  "single_extruder_multi_material": "1",
  "change_filament_gcode": "",
  "machine_pause_gcode": "PAUSE",
  "wipe": [
    "1"
  ],
  "default_filament_profile": [
    "Voron Generic ABS"
  ],
  "default_print_profile": "0.20mm Standard @Voron",
  "bed_exclude_area": [
    "0x0"
  ],
  "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n; You can use following code instead if your PRINT_START macro support Chamber and print area bedmesh\n; PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] Chamber=[chamber_temperature] PRINT_MIN={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_MAX={first_layer_print_max[0]},{first_layer_print_max[1]}",
  "machine_end_gcode": "PRINT_END",
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
  "scan_first_layer": "0",
  "nozzle_type": "undefine",
  "auxiliary_fan": "0"
}