{
  "type": "machine",
  "setting_id": "GM001",
  "name": "Qidi X-Plus 3 0.4 nozzle",
  "from": "system",
  "instantiation": "true",
  "inherits": "fdm_qidi_common",
  "printer_model": "Qidi X-Plus 3",
   "default_print_profile": "0.20mm Standard @Qidi XPlus3",
  "nozzle_diameter": [
    "0.4"
  ],
  "printable_area": [
    "0x0",
    "280x0",
    "280x280",
    "0x280"
  ],
  "printable_height": "270",
  "nozzle_type": "undefine",
  "auxiliary_fan": "0",
  "machine_max_acceleration_extruding": [
    "20000",
    "10000"
  ],
  "machine_max_acceleration_retracting": [
    "20000",
    "10000"
  ],
  "machine_max_acceleration_travel": [
    "1500",
    "1250"
  ],
  "machine_max_acceleration_x": [
    "20000",
    "10000"
  ],
  "machine_max_acceleration_y": [
    "20000",
    "10000"
  ],
  "machine_max_acceleration_z": [
    "500",
    "250"
  ],
  "machine_max_speed_e": [
    "25",
    "25"
  ],
  "machine_max_speed_x": [
    "600",
    "200"
  ],
  "machine_max_speed_y": [
    "600",
    "200"
  ],
  "machine_max_speed_z": [
    "12",
    "12"
  ],
  "machine_max_jerk_e": [
    "2.5",
    "2.5"
  ],
  "machine_max_jerk_x": [
    "9",
    "9"
  ],
  "machine_max_jerk_y": [
    "9",
    "9"
  ],
  "machine_max_jerk_z": [
    "0.2",
    "0.2"
  ],
  "max_layer_height": [
    "0.28"
  ],
  "min_layer_height": [
    "0.08"
  ],
  "printer_settings_id": "Qidi",
  "retraction_minimum_travel": [
    "1"
  ],
  "retract_before_wipe": [
    "0%"
  ],
  "retraction_length": [
    "2"
  ],
  "retract_length_toolchange": [
    "10"
  ],
  "deretraction_speed": [
    "30"
  ],
  "single_extruder_multi_material": "0",
  "change_filament_gcode": "",
  "machine_pause_gcode": "M0",
  "default_filament_profile": [
    "Qidi Generic PLA"
  ],
  "machine_start_gcode": "G28\nG28 Z\n;G29\nG0 X4 Y5 Z50 F6000\nG0 Z0.3 F600\nM82\nG92 E-36.45\nG1 Y120 E-27.45 F3000\nG1 X6 E-27.30\nG1 Y5 E-18.30\nG1 X8 E-18.15\nG1 Y120 E-9.15\nG1 X10 E-9\nG1 Y5 E0\n\n",
  "machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG91\nG0 Z10 F600\nG90\nG0 X0 Y0 F12000\nG1 Z{max_layer_z + 0.5} F900 \n\n\n\n",
  "scan_first_layer": "0"
}