{
	"type": "machine",
	"setting_id": "GM001",
	"name": "Sovol SV07 0.4 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_machine_common",
	"printer_model": "Sovol SV07",
	"default_print_profile": "0.20mm Standard @Sovol SV07",
	"nozzle_diameter": [
		"0.4"
	],
	"printable_area": [
		"0x0",
		"220x0",
		"220x220",
		"0x220"
	],
	"printable_height": "250",
	"nozzle_type": "undefine",
	"auxiliary_fan": "0",
	  "machine_max_acceleration_e": [
        "20000"
    ],
    "machine_max_acceleration_extruding": [
        "4000",
        "1250"
    ],
    "machine_max_acceleration_retracting": [
        "4000",
        "1250"
    ],
    "machine_max_acceleration_travel": [
        "1500",
        "1250"
    ],
    "machine_max_acceleration_x": [
        "8000",
        "960"
    ],
    "machine_max_acceleration_y": [
        "8000",
        "960"
    ],
    "machine_max_acceleration_z": [
        "400",
        "200"
    ],
    "machine_max_jerk_e": [
        "15",
        "4.5"
    ],
    "machine_max_jerk_x": [
        "27",
        "8"
    ],
    "machine_max_jerk_y": [
        "27",
        "8"
    ],
    "machine_max_jerk_z": [
        "3.6",
        "0.4"
    ],
    "machine_max_speed_e": [
        "500",
        "120"
    ],
    "machine_max_speed_x": [
        "500",
        "100"
    ],
    "machine_max_speed_y": [
        "500",
        "100"
    ],
    "machine_max_speed_z": [
        "500",
        "12"
    ],
    "machine_min_extruding_rate": [
        "0"
    ],
    "machine_min_travel_rate": [
        "0"
    ],
	"max_layer_height": [
		"0.25"
	],
	"min_layer_height": [
		"0.07"
	],
	"printer_settings_id": "Sovol",
	"use_relative_e_distances": "0",
	"gcode_flavor": "klipper",
	"fan_kickstart": "0.2",
    "fan_speedup_overhangs": "0",
    "fan_speedup_time": "0.5",
	"retraction_minimum_travel": [
		"0.5"
	],
	"retract_before_wipe": [
		"0%"
	],
	"retraction_length": [
		"0.5"
	],
	"retract_length_toolchange": [
		"1"
	],
	"retraction_speed": [
		"140"
	],
	"deretraction_speed": [
		"140"
	],
	"single_extruder_multi_material": "1",
	"change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change",
	"machine_pause_gcode": "M601",
	"default_filament_profile": [
		"Sovol Generic PLA"
	],
	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single] ; Setting bed temprature\nM109 S[nozzle_temperature_initial_layer] ; Setting hot-end temprature\nSTART_PRINT ; Running macro from klipper\n",
	"machine_end_gcode": "END_PRINT",
	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;G92 E0.0\n;[layer_z]\n\n",
	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
	"scan_first_layer": "0"
}