{
  "type": "machine",
  "instantiation": "false",
  "deretraction_speed": ["60"],
  "from": "system",
  "inherits": "fdm_machine_common",
  "machine_end_gcode": "END_PRINT",
  "machine_max_acceleration_e": ["1000", "5000"],
  "machine_max_acceleration_extruding": ["2500", "20000"],
  "machine_max_acceleration_retracting": ["2500", "5000"],
  "machine_max_acceleration_x": ["2500", "20000"],
  "machine_max_acceleration_y": ["2500", "20000"],
  "machine_max_jerk_e": ["30", "2.5"],
  "machine_max_jerk_x": ["7", "9"],
  "machine_max_jerk_y": ["7", "9"],
  "machine_max_jerk_z": ["7", "0.4"],
  "machine_max_speed_e": ["100", "25"],
  "machine_max_speed_x": ["350", "200"],
  "machine_max_speed_y": ["300", "200"],
  "machine_max_speed_z": ["5", "12"],
  "machine_start_gcode": "START_PRINT MATERIAL=[filament_type] BED=[bed_temperature_initial_layer]\n",
  "name": "ginger_one_common",
  "print_host": "192.168.0.167",
  "printer_settings_id": "ginger_one_common",
  "retract_restart_extra": ["0.5"],
  "retraction_length": ["3"],
  "retraction_minimum_travel": ["10"],
  "retraction_speed": ["60"],
  "version": "1.9.0.2",
  "wipe_distance": ["10"],
  "z_hop": ["0.1"],
  "z_hop_types": ["Auto Lift"]
}