{
  "type": "filament",
  "from": "system",
  "instantiation": "false",
  "name": "fdm_filament_petg",
  "inherits": "fdm_filament_common",
  "hot_plate_temp": [
    "70"
  ],
  "hot_plate_temp_initial_layer": [
    "70"
  ],
  "overhang_fan_threshold": [
    "25%"
  ],
  "overhang_fan_speed": [
    "90"
  ],
  "filament_flow_ratio": [
    "0.95"
  ],
  "reduce_fan_stop_start_freq": [
    "1"
  ],
  "fan_cooling_layer_time": [
    "30"
  ],
  "filament_cost": [
    "30"
  ],
  "filament_density": [
    "1.27"
  ],
  "filament_max_volumetric_speed": [
    "10"
  ],
  "filament_retraction_minimum_travel": [
    "0"
  ],
  "filament_retraction_length": [
    "1.8"
  ],
  "nozzle_temperature_initial_layer": [
    "255"
  ],
  "nozzle_temperature": [
    "245"
  ],
  "temperature_vitrification": [
    "160"
  ],
  "fan_max_speed": [
    "90"
  ],
  "fan_min_speed": [
    "40"
  ],
  "slow_down_min_speed": [
    "20"
  ],
  "enable_pressure_advance": [
    "1"
  ],
  "pressure_advance": [
    "0.03"
  ],
  "default_filament_colour": [
    "#DF6734"
  ],
  "filament_type": [
    "PETG"
  ],
  "nozzle_temperature_range_low": [
    "220"
  ],
  "nozzle_temperature_range_high": [
    "270"
  ]
}