{
    "type": "filament",
    "filament_id": "GFG98",
    "setting_id": "GFSG50",
    "name": "Qidi Generic PETG-CF",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_filament_pet",
    "temperature_vitrification": [
        "75"
    ],
    "overhang_fan_threshold": [
        "25%"
    ],
    "overhang_fan_speed": [
        "90"
    ],
    "cool_plate_temp": [
        "0"
    ],
    "eng_plate_temp": [
        "70"
    ],
    "hot_plate_temp": [
        "70"
    ],
    "textured_plate_temp": [
        "70"
    ],
    "cool_plate_temp_initial_layer": [
        "0"
    ],
    "eng_plate_temp_initial_layer": [
        "70"
    ],
    "hot_plate_temp_initial_layer": [
        "70"
    ],
    "textured_plate_temp_initial_layer": [
        "70"
    ],
    "required_nozzle_HRC": [
        "40"
    ],
    "filament_type": [
        "PETG-CF"
    ],
    "nozzle_temperature_range_low": [
        "240"
    ],
    "nozzle_temperature_range_high": [
        "290"
    ],
    "nozzle_temperature_initial_layer": [
        "280"
    ],
    "nozzle_temperature": [
        "280"
    ],
    "filament_cost": [
        "34.99"
    ],
    "filament_density": [
        "1.25"
    ],
    "filament_max_volumetric_speed": [
        "8"
    ],
    "slow_down_layer_time": [
        "6"
    ],
    "enable_pressure_advance": [
        "1"
    ],
    "fan_cooling_layer_time": [
        "30"
    ],
    "fan_max_speed": [
        "30"
    ],
    "fan_min_speed": [
        "10"
    ],
    "filament_flow_ratio": [
        "0.95"
    ],
    "pressure_advance": [
        "0.05"
    ],
    "filament_vendor": [
        "Generic"
    ],
    "compatible_printers": [
        "Qidi X-Plus 0.2 nozzle",
        "Qidi X-Max 0.2 nozzle",
        "Qidi X-CF Pro 0.2 nozzle",
		"Qidi X-Smart 3 0.2 nozzle",
		"Qidi X-Plus 3 0.2 nozzle",
		"Qidi X-Max 3 0.2 nozzle",
        "Qidi X-Plus 0.4 nozzle",
        "Qidi X-Max 0.4 nozzle",
        "Qidi X-CF Pro 0.4 nozzle",
		"Qidi X-Smart 3 0.4 nozzle",
		"Qidi X-Plus 3 0.4 nozzle",
		"Qidi X-Max 3 0.4 nozzle",
        "Qidi X-Plus 0.6 nozzle",
        "Qidi X-Max 0.6 nozzle",
        "Qidi X-CF Pro 0.6 nozzle",
		"Qidi X-Smart 3 0.6 nozzle",
		"Qidi X-Plus 3 0.6 nozzle",
		"Qidi X-Max 3 0.6 nozzle",
        "Qidi X-Plus 0.8 nozzle",
        "Qidi X-Max 0.8 nozzle",
        "Qidi X-CF Pro 0.8 nozzle",
		"Qidi X-Smart 3 0.8 nozzle",
		"Qidi X-Plus 3 0.8 nozzle",
		"Qidi X-Max 3 0.8 nozzle",
        "Qidi Q1 Pro 0.2 nozzle",
        "Qidi Q1 Pro 0.4 nozzle",
        "Qidi Q1 Pro 0.6 nozzle",
        "Qidi Q1 Pro 0.8 nozzle",
        "Qidi X-Plus 4 0.2 nozzle",
        "Qidi X-Plus 4 0.4 nozzle",
        "Qidi X-Plus 4 0.6 nozzle",
        "Qidi X-Plus 4 0.8 nozzle"
    ]
}