{
    "type": "filament",
	"filament_id": "GFG99",
    "setting_id": "GFSG99",
    "name": "Bambu PETG",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_filament_pet",
	"reduce_fan_stop_start_freq": [
        "1"
    ],
    "slow_down_for_layer_cooling": [
        "1"
    ],
    "fan_cooling_layer_time": [
        "30"
    ],
    "overhang_fan_speed": [
        "90"
    ],
    "overhang_fan_threshold": [
        "10%"
    ],
    "fan_max_speed": [
        "40"
    ],
    "fan_min_speed": [
        "10"
    ],
    "slow_down_min_speed": [
        "20"
    ],
    "slow_down_layer_time": [
        "8"
    ],
    "filament_flow_ratio": [
        "0.95"
    ],
    "filament_max_volumetric_speed": [
        "16"
    ],
    "enable_pressure_advance": [
        "1"
    ],
    "pressure_advance": [
        "0.04"
    ],
    "hot_plate_temp_initial_layer" : [
        "80"
    ],
    "hot_plate_temp" : [
      "80"
    ],
    "filament_density":[
      "1.24"
    ],
    "filament_vendor": [
        "Bambu Lab"
    ],
	"compatible_printers": [
        "Qidi X-Plus 0.4 nozzle",
        "Qidi X-Max 0.4 nozzle",
        "Qidi X-CF Pro 0.4 nozzle",
		"Qidi X-Smart 3 0.4 nozzle",
		"Qidi X-Plus 3 0.4 nozzle",
		"Qidi X-Max 3 0.4 nozzle"
	]
}